Part Number: SN74LVC1G07-EP Hi Sir,
I use SN74LV1G07 to convert a 3.3V input signal to a 1.8V output signal.
However, due to the current design, the 1.8V power-up occurs before 3.3V, I'm not sure if there will be any abnormality in the output when…
Part Number: SN74LVC1G07-EP Other Parts Discussed in Thread: SN74LVC1G07 , SN74HCS72 , SN74LVC1G06 Hi,
For this SN74LVC1G07-EP and the SNLVC1G06-EP the data sheets say open drain output and the logic diagram table use H on the output instead of Hi-Z…
Part Number: SN74LVC1G07-EP Hi team,
My customer wants to get SN74LVC1G07MDCKREP following thermal information:
・RθJA : Junction-to-ambient thermal resistance ・RθJC(top) :Junction-to-case (top) thermal resistance ・RθJB ： Junction-to-board thermal…
Part Number: SN74LVC1G07-EP How much current can I sink with the SN74LVC1G07MDCKREP if I’m powering it with 2.5V?
There is a note on the datasheet that says I can sink 32mA of current, but does that mean at a certain supply voltage?
This is the table…
Part Number: SN74AUP1G07 Other Parts Discussed in Thread: SN74LVC1G08-EP , SN74AHC1G08 , SN74LVC1G07-EP , SN74LVC2G17-EP , SN74LVC1G32-EP , SN74LVC1G125-EP , OPA341 , OPA347 Tool/software: Hi
Could you help confirm the following specifications. Does…
Part Number: TDA4APE-Q1 Hi, Different line impedance mentioned for PCIe ref clock. Below near Clock generator, it says 100 ohms: but near PCIe connector it says, 85 ohms: PROC184E2(002)_SCH.pdf and for PCIe data lines it says 85 ohms, But some references…
