Part Number: SN74LVC1G66-Q1 Other Parts Discussed in Thread: TS5A3166-Q1 Hi there,
I'm planning to use the component as a reset switch for an integrator stage opamp.
The max voltage on the integrator capacitor is 3.3V, C=20n, and the reset integrator…
Part Number: SN74LVC1G66-Q1 Hi Expert,
May I know if there is any data for the leakage current of SN74LVC1G66QDCKRQ1 in high humidity environment?
Is there any humidity test performed and can you share the test report?
Thanks！
Ethan Wen
Part Number: SN74LVC1G66-Q1 Other Parts Discussed in Thread: TS5A3167 I would like to protect the input of a C2000 ADC input pin that is unpowered but there might be a voltage at the ADC input higher than 0.7V even when the C2000 is unpowered.
I would…
Part Number: TS5A3166-Q1 Other Parts Discussed in Thread: SN74LVC1G66-Q1 e2e,
I'm planning to go with TS5A3166-Q1 despite its cost vs SN74LVC1G66-Q1 and have some questions:
Applying 3.63V to VNO/VCOM when V+= 0; I think this would be a problem…
Part Number: PGA460-Q1 Other Parts Discussed in Thread: PGA460 , ENERGIA , PGA460PSM-EVM , TS12A12511 , TMUX6119 , TMUX1121 , TMUX1122 , SN74LVC1G66
Hello,
I wanna use 2 transciever sensor that synchronous each other with PGA460-Q1. How can I do? Do I need 2…
It is scattered between four.
We didn't run any EMI test with this particular board. These are fresh boards and their first tests under normal electrical and environmental conditions.
Error time is random. Some endured more than 10 hours some burnt…
Hi Kumar,
In terms of 10KHz and your clock mixing application, CD4051B-Q1 should be a good fit. I also have two other devices you may want to consider, TS5A23157-Q1 and SN74LVC1G66-Q1. Based on your supply voltage, input voltage range and channel count…
Part Number: SN74LVC1G66 Other Parts Discussed in Thread: SN74CB3Q3305
Hi team,
I want to use SN74LVC1G66. VCC is 3.3V. The datasheet shows the I/O port voltage range is from 0 to VCC.
Q1:I want to confirm if the input voltage exceeds 3.3V, can the input…
