Part Number: TAS2559EVM Other Parts Discussed in Thread: TAS2559 , TAS5825M Hello team,
I have several questions regarding TAS2559EVM.
I can't find registor map of TAS2559 although TAS5825M have an option of registor map. How can I see register of TAS2559…
Hello,
Haven't heard from you in a while so I am closing this thread for now. Hope my previous reply was enough to solve your issue but feel free to respond here or open a new thread if you are still having issues.
Best Regards,
Justin Beigel
Part Number: TAS2559EVM Other Parts Discussed in Thread: TAS2559 I have exactly the same issues described in the previous thread.
I can run a system test in purepath console 3.
I get an error saying failed to update process flow.
Most of the time the software…
Omid,
I have replied to your direct email. I'll follow up with you over there and set this thread as closed for now.
Best regards, -Ivan Salazar Applications Engineer - Low Power Audio & Actuators
Part Number: TAS2559EVM Other Parts Discussed in Thread: TAS2559 Hi
I run the TAS2559's "running hardware checks" The speaker test will fail as shown below.
I set the jumper to mono, and actually the sound is output to the device A speaker…
Hi,
I apologize for late response, this thread got lost somehow and noticed it just now.
You could do the following two things:
- Use the I2C log recorder on PurePath Console 3, this way you can record the I2C commands sent to the device for any configuration…
Hi user5364297,
I haven't heard back from you, so I assume you were able to resolve your own issue. If not, don't hesitate to reply below or create a new thread.
My apologies again for dropping this, have a happy holiday season!
-Jim
Part Number: TAS2559EVM Hello support team,
TAS2559EVM application note page7 "5. Proceed with characterization per the PPC3 User’s guide.", Where PPC3 User's guide is available?
Part Number: TAS2559EVM I've run into a problem with PPC3 where it runs as expected on a Windows 10 machine, but is completely unusable on another. Everything appears normal until I enter the Tuning and Audio Processing section, upon which I receive a…
Hi,
After connecting the TAS2559EVM to my hardware(MCLK and DIN to EVM, BCLK and WCLK from EVM, common GND), and using the config you supplied (with WDIV changed to 32), the TAS2559 is generating BCLK=706 kHz, WCLK=22.05 kHz. However, when my system sends…