Part Number: TAS5828M Other Parts Discussed in Thread: TAS5822M , Tool/software: hello
Where can I download the initialization code of TAS5828M, or you can send me here, I need the initialization code file of TAS5822M stereo (BTL).
Part Number: TAS5828M
Hi Team
My customer wants to check: with PVDD at 24V, a 1.2 ohm speaker, and operating in PBTL mode, can the device support 45W output?
From both the PVDD voltage range and the TAS5828 overcurrent threshold (TAS5828 is 7.5A…
Part Number: TAS5828M Tool/software: Hi Team,
In "software mode", After 30 seconds of power on, the SDA signal will reach a low voltage level. resulting in the inability to function properly, Please help confirm the circuit.
Part Number: TAS5828M Tool/software: TAS5828M is powered by 24.5V, in BTL mode, with a 4-ohm load. There was a situation where the power supply pins and output pins of the power amplifier were burned out. What was the cause of this?
Part Number: TAS5828MEVM Other Parts Discussed in Thread: TAS5828M Hi
The TAS5828M EVM board, with DC 23V 4R has a chopping power of only 12W. Can this demo board achieve 12W with 1% accuracy,
Is it because of some incorrect settings, or is it because…
Part Number: TAS5828M Dear TI Engineer,
In our testing TAS5828M, we found that when configuring it in BTL mode, the outputs of OUT_A+and OUT_A - are in-phase square waves. The waveform is as below:
The register configuration is as follows:
…
Part Number: TAS5828M Hi team,
Customer working on tunning the TAS5828M EMI.
They get questions regarding the Spread Spectrum settging.
Does TAS5828M support Triangle SSand Random SS work at the same time?
2. In datasheet Spread Spectrum…
Part Number: TAS5828M Other Parts Discussed in Thread: TAS3251 Tool/software: Hello， I want to use tas5828M in new project. Please help to add the TAS5828 app into PPC3 platform. My email address for PPC3 is kenny@musilab.com.cn
Part Number: TAS5828M Tool/software: Hi,
Im trying to configure the volume of each channel of the TAS5828m indepently.
I understand that there is only one setting for both channels on book 0, page 0 as documented in the datasheet.
Also from the…
