Part Number: TAS6424MS-Q1 Other Parts Discussed in Thread: TAS6424M-Q1 Hello Expert,
I have question for I2S rise/fall time requriement. This device only have typical requirement for rise/fall time as 5ns(typ).
Also, I found following E2E thread customer…
Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424M-Q1 , Hello,
In order to do drop-in replacement from TAS6424M-Q1 to TAS6424E-Q1, our customer has a question about specification differecnes betwenn TAS6424E-Q1 vs TAS6424M-Q1.
while…
Part Number: TAS6424M-Q1 Hello,
Our customer has a question if TAS6424M-Q1 works normally even when a user access 0x28 then write 2Ah data.
I am thinking nothing is happened but would you pelase suggest if it works abnormally in that case.
best…
Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424ME-Q1 , Hi team,
Could you please clarify if there is a way to distinguish between the TAS6424E-Q1 and the TAS6424ME-Q1 through internal registers?
Thanks
Xiaoxiang
Hi Kuramochi-san
For the I2C part, you could check the general specification document directly, as below link. Our device followed this general spec.
https://www.nxp.com/docs/en/user-guide/UM10204.pdf
Kazuki Kuramochi said: Additionally, regarding…
Hi Ive,
Could you clarify what the first picture is trying to show?
Ive Zhang said: After that, I read the diagnostic results from registers 0x0C and 0x0D, clear the fault, and write 0x00 to register 0x04 to set all four channels to PLAY mode.
When…
Hi Kokila K.
Kokila Karuppusamy said: 1. Is this split architecture supported or recommended for TAS6424?
Yes, TAS6424 can support this.
Kokila Karuppusamy said: 2. Are there synchronization concerns between: - I2C control (mute/unmute, gain…
Part Number: TAS6424M-Q1 Tool/software: Hello Audio team, Similar to the question: TAS6424M-Q1: output power vs vbatt input range - Audio forum - Audio - TI E2E support forums I am testing the device TAS6424M-Q1 and I am not able to get the output power…
Part Number: TAS6424MS-Q1 Please check the Rjc(top) is 0.4°C/W or 0.7°C/W of TAS6424MS-Q1.
It's 0.4°C/W in 7.4 Thermal Information but 0.7°C/W in Table 12-1 of tis Datasheet.
Thank you
