Part Number: TAS67524-Q1 Hello Team,
In the HCP3 project, we are using both the TAS67524‑Q1 and TAS6754‑Q1 amplifiers. Could you please clarify the differences between these two devices?
Part Number: TAS67524-Q1 Hello,
We are evaluating an automotive audio product using the TAS67524-Q1.
During our investigation of a pop noise that occurs during ACC OFF, we confirmed that the occurrence of the pop noise depends on the connected speaker…
Part Number: TAS67524-Q1 Other Parts Discussed in Thread: TAS6424E-Q1 , TAS6424E Hello, Team,
We are considering whether to use the TAS67524-Q1 or the TAS6424E-Q1 for our new product development. We have obtained both EVMs and are currently conducting…
Part Number: TAS67524-Q1 We are researching Class‑D amplifiers capable of driving a 1-ohm load. We would like to confirm whether the TAS67524 can drive a 1-ohm load when used in a PBTL configuration. If it is possible, could you please share the corresponding…
Hi
masataka ohashi said: So even if the DC Load Diag detects a fault, please tell me when and what command to send to the TAS67524 to run the AC Load Diag.
Firstly set the CH1/2 into Sleep mode, with register 0x03 set value 0x22.
Then start the…
Part Number: TAS67524-Q1 Dear TI Members
We are developing automotive audio equipment using the TAS67524-Q1.
Since development began before the MP (mass production) version of the TAS67524-Q1 was available, the prototypes we are currently developing…
Part Number: TAS67524-Q1 Other Parts Discussed in Thread: TAS6754-Q1 HI All, We are using the "TAS67524QDKQRQ1" in our design i need FMEDA and DFMEA Report to do my documentation. Kindly requesting you to provide it.
Part Number: TAS67524-Q1 Other Parts Discussed in Thread: TAS6754-Q1 Hello, Team,
The TAS67524-Q1 datasheet specifies that pins 4 and 53 should be connected to GND. We understand this to be a change from the TAS6754-Q1. Actually, if you need to connect…
Part Number: TAS67524-Q1 Hello, Team,
We’re having trouble identifying the version of the IC device we have on hand. Could you please tell us how to find out the version?
For your reference, the following markings are printed on the IC devices. ”58AJ9KK…
