Hi Hangjie,
You can use TCAN1043A EVM as a reference. For 500Hz and 1Mhz there won't be difference.
Attached is a draft, which will be used as internal reference in the future. I'm still working on it.
CANLIN schematic review.pptx
Regards,
…
Hi Aswathi,
Sorry for late response.
Aswathi R said: Have you tried the suggestion shared by Brennan over mail?
"Ensure that J21 does not have a jumper populated. When populated, the jumper pulls down the WAKE signal to the TCAN1043A transceiver…
Hi HongFan,
Thanks for reaching out on E2E!
What specifically made you select the TCAN1043HG? If you do not need the 70V bus protection (denoted by the "H" suffix), then I highly recommend using TCAN1043N or TCAN1043A. These are on a newer process…
Part Number: TCAN1146-Q1 Hi team,
I have a question from customer for TCAN1146-Q1 sleep current:
We have a short question regarding the TCAN1146DYYRQ1 INH pin. Can you please let us know, what is the min. and max. leakage current during sleep mode…
Hi Subhash,
Please share a waveform with EN, nSTB, INH, and nFAULT all together when trying to enter Normal mode. This is the best way for me to help troubleshoot this issue.
Subhash Ponnusamy said: 1. During power on the EN, nSTB and INH became High…
Part Number: TCAN1044A-Q1 Hi Expert,
Customer report an issue for TCAN1044A-Q1 that it will detect the error frame at heavy load(>90%) communication. The test procedure as below.
Repeat the IG ON/OFF test(turn on/off CAN communication), the error…
Part Number: TCAN1146-Q1 Other Parts Discussed in Thread: TCAN1043-Q1 , , TCAN1043 , TCAN1145EVM Tool/software: Hi team,
Could you help take a look at below questions from customer about TCAN1146-Q1 and TCAN1043-Q1?
TCAN1146
1. How do we clear the…
Part Number: TCAN1043-Q1 Other Parts Discussed in Thread: TCAN1043 , STRIKE I work in the automotive industry and one of our design includes the TCAN1043A network wake CAN transciever. We're experiencing failures of the devices frequently throughout environmental…
Hi Mahesh,
The CAN network is based on a half-duplex differential signal. CAN has a single sender with priority arbitration. If two or more nodes attempt to send simultaneously, any nodes transmitting a lower priority ID will stop transmitting…
[Click here to return to Transceiver Homepage]
Welcome to the CAN Transceivers E2E page!
Listed below are a variety of resources to assist with the implementation of the Controller Area Network, aka CAN!
Frequently Asked Questions (FAQs):…
