Part Number: THS4082 Other Parts Discussed in Thread: OPA171 Tool/software: Hi Team,
i am working on a problem , and i need your help to identify the approach.
1) info;- we are working on peak detector circuit as shown below, so here we are trying…
Hi Daniel,
I would use this scheme:
The first resistor limits the current through the Schottky diodes. The Schottky diodes clamp the input voltage of THS4082 to the supply rails and limit the overvoltage to the turn-on voltage of these Schottky…
Hi,
The THS4082 bandwidth does start to roll off around 30 MHz depending on the supply and feedback resistor. It then peaks back up from the second pole effect in the response of the amplifier. You can see the effect over various conditions in the…
Other Parts Discussed in Thread: THS4082 Dear Sir,
We have an Pulse Pattern generator with frequency range DC to 120 MHz and with Amplitude of 50mVpp to 5 Vpp in 50 Ohms.Now i have to generate 10 Vpp in 50 Ohms load when the output from generator is…
Uttan-san
Thank you for attach the good information.
Customer request that low cost OPAMP, I choice THS4052 and THS4082 by reference to above training.
※About offset and noise etc, these device is larger than THS4032.
I confirming to customer…
Other Parts Discussed in Thread: THS4032 , THS4012 , THS4022 , THS4082 It seeems the tool does not work very much.
I need, for an audio output of a DAC an OPA with the followings
Double 8-Pin SOIC
Voltage feedback
Unity gain stable
rails >=…
to User473,
I searched all the op amp portfolio with the parametric search (precision, general purpose, and high-speed). There are 6 options with temperatures of 150C and above (see attached). The best match is the OPA211-HT (210C max). This is the…
