Part Number: THS4304 Hello experts
My application is to convert 15MHz signal from photo diode to FPGA.
Current from PD is approximately between 16uA to 2uA.
Power supply is limited to 3.3V (single supply).
As such, I'd like to use THS4304 for this application…
Part Number: THS4304 Other Parts Discussed in Thread: OPA211 , OPA827 , Is there a list of all the opamps that use the SiGe CMOS process? The THS4304 is one, the OPA211 and OPA827 are others. I'm hoping to get a complete list of all options so I don't have…
Hello Adam,
Thank you for your patience. THS4304 Pspice model does work in a single supply configuration as shown below in comparison to Kai's Tina-TI simulation:
Attached below is the PSpice project.
THS4304-SP-PSpiceFiles.zip
Best Regards, S…
Part Number: THS4304DBVEVM Other Parts Discussed in Thread: THS4304 Excuse me, is there a recommended circuit for THS4304 single power supply? Are there any restrictions on single power supply?
Part Number: THS4304 Other Parts Discussed in Thread: OPA855 I want to use THS4304 to amplify the uv voltage signal.
My signal is almost 220MHz, 46uv pulse signal. I want to amplify it to 46mv. Maybe I need to use two THS4304 amplifiers to solve this problem…
Part Number: THS4304 Hello,
When using singled-ended power supply of THS4304, the output of simulation with TINA is DC output, but when using dual power supply, the output has no problem. So could you please help to analyze the problem of single power…
Part Number: THS4304-SP Hi team, working with a customer on this device. Some questions on the implementation of the device:
Datasheet on page 12 under General applications, discusses that 0.1uF ceramic cap is critical for power supply bypass. Text implies…
Part Number: THS4304 Hello, i would like to know if there will be any problem if i use a miss balance power supply like Vcc= 3.5V and Vss = -1.5V.
Thanks
Hi Brian,
an ESD protection scheme can usually withstand 10mA for a brief period. But if the ESD protection scheme is used to repeatedly shunt input overvoltages to the supply rails, the current through the ESD protection scheme should be limited to…