Part Number: THS4511-SP Hi team,
A question from one of our customers:
The THS4511-SP datasheet states that the IC can tolerant radiation at a total ionizing dose of 150krad, but does not state the radiation tolerance per hour, can it operate in a nuclear…
Part Number: THS4511-SP Hello,
This is an update post on the status of an equivalent engineering model part of the THS4511-SP. The original question was asked a while ago; I am happy to state the new engineering model of the THS4511-SP is now listed on…
Part Number: THS4511-SP Other Parts Discussed in Thread: THS4511 , THS4513-SP Hi
My customer is looking for an equivalent engineering model part for the THS4511-SP. (same package and functionality but not flight grade, lower cost).
Is one available?
Thanks…
Part Number: THS4511-SP Hi all,
1. Is there a gerber file available for the ceramic dual flatpack option available?
If not, what should be considered in layout?
The long leads will add additional inductance compared to the smt version.
/Mark
Part Number: THS4511-SP Other Parts Discussed in Thread: THS4511 What is the minimum open-loop gain for the THS4511-SP pre & post radiation at 10MHz? DO we have an open-loop gain plot that we can share?
Part Number: THS4511 Dear Sir/Madam,
I would like to find out the process technologies node for THS4511 - RGTT and SP.
Is both devices fab base on BiCOM 3 process technologies node.
What is the main different between RGTT and SP grade, is both part based…
Part Number: ADS1278-SP Other Parts Discussed in Thread: THS4511-SP , THS4513-SP , , THS4521 Hello,
I was wondering if there are design recommendations for radiation tolerant drivers for the ADS1278-SP. The datasheet calls out THS4521 but there is no radiation…
Other Parts Discussed in Thread: THS4511-SP , TINA-TI , THS4511 , ADS5500 On page 5 of the data sheet for the THS4511-SP it lists the max and min Quiescent Current. Is the Quiescent current draw the only current draw through the THS4511-SP? Is it correct…
Yes it can. You would need to modify some formulas so that the internal 25 ohms in the feedback path of the LMH5401-SP is changed to 0ohms as is the case for the THS4511-SP. So Rf would equal Rf* for THS4511-SP.
thanks
Christian
Part Number: LMP2012QML-SP Other Parts Discussed in Thread: ADS1278 , LMP2012 , LMP2011 , TINA-TI , THS4511 , THS4513 , THS4304 , THS4521 , LMP2012QML , ACF2101 , IVC102 Hi,
What is output impedance and maximum capacitive load driving capability of the op amp LMP2012QML…