Other Parts Discussed in Thread: THS4524 Hello, Could you please let me know the recommended pin connection of unused opamp of THS4524? Since the device VSx pins are separated, can we left open unused opamp pins? Best Regards, Ryuji Asaka
Other Parts Discussed in Thread: THS4524 , THS4521 , TINA-TI The THS4524 data sheet refers only to gains of 1, 2, 5, and 10. Can we use this amplifier for a gain of 50 or 100? Note, we only need frequencies up to about 20kHz.
What values of resistors…
Other Parts Discussed in Thread: THS4524 , ADS1278 hi...
I am using THS4524 as an amplifier on my analog board and a 0.9 v Vocm is required.
this Vocm is to be given externally. plz suggest the best possible ckt..
is using a resistor divider…
Other Parts Discussed in Thread: THS4524 , ADS1274 , OPA1632 , THS4521 , ADS1278 Hello,
I have to design a driver for the AD converter ADS1274 to get maximum performance. In the datasheet of the ADC the amplifier THS4524 is recommended. The obvious…
Other Parts Discussed in Thread: THS4524 , THS4521 Customer wants to know if the THS4524 can drive 12" of 50 ohm trace. To me it seems that the 50 ohm characteristic impedance is not the issue, but rather that the load is matched to the trace. Is that…
Part Number: THS4500-EP Other Parts Discussed in Thread: THS4524-EP , THS4551 Tool/software: Hi,
Requesting to provide the lifecycle (Active/Obsolete) details of below exact part:
HONEYWELL PART NUMBER
MANUFACTURER PART NUMBER
…
Part Number: ADS1278-EP Other Parts Discussed in Thread: TMS570LS3137 , ADS1278 , THS4524 Hello Team,
I am trying to connect the ADS1278 with TMS570LS3137 MibSPI, I am seeing some inconsistence output from SPI Output.
My setup is i am driving the…
Ryan, I believe the confusion is on my end. I have gone back to both datasheets and I did misunderstand the FSR of the ADS1278. I thought the FSR of +/-Vref was midscale plus/minus Vref, which in my case would have been a 0V to 5V input. My gain setting…
Part Number: TLV3404 Other Parts Discussed in Thread: TLC393 , THS4524 , Hello,
We are looking for the maximum pulse voltage that can withstand the inputs of TLV3404, TLC393 and THS4524. The pulse width is from 10 to 500µs. Could you help us?
Thank…
