Part Number: THS6212 Hi expert,
I have a customer want to use THS6212 as the PA.
and they want to know the recommend functional mode under different scenarios.
1. Sending signals, does full bias mode is the best?
2.do not send signal, does shut…
Part Number: THS6212 Other Parts Discussed in Thread: THS6222 Hi team,
Parameters can be seen in the datasheet of THS6212 :
Inverting input bias current matching
Input offset voltage matching
How to understand these two parameters? How are they…
Part Number: THS6212 Other Parts Discussed in Thread: THS6214 Hi，
One of my customer met the problem when using the THS6212 and THS6214, and the problem shows as below:
THS6212 & THS6214 test waveform is compared as follows:
THS6212
THS6214…
Part Number: THS6212 Hi，
There is something confusion about THS6212 using, and hope you can give me some suggestion. As we know Pin 4 is IADJ, and how to using it? Some customer connect it to GND with a resistor ,but how to choose the resistor value…
Part Number: THS6212 Hi ,
could you offer me these parameters about THS6212, because I find nothing about these in it's datasheet!
1 The relative humidity range under working condition?
2 The altitude level under working condition?
3 Reflow soldering…
Part Number: THS6212 Hi all,
As we know THS6212 is facing a strong competitor ISL15102 (from RENESAS) in PLC (power line communication) marketing, and they are Pin to Pin in design. Is there anyone who does the research about their difference in typical…
Part Number: THS6212 Hi
1. Is THS6212 a voltage or current line driver?
2. If the working frequency is within 30MHz, the minimum differential voltage of the receiving terminal is about 10mV.
How far can THS6212 transmit signals on twisted pair …
Part Number: THS6212 Other Parts Discussed in Thread: THS4541 , LMH6554 We are designing transformer-isolated differential industrial communication and are looking at the THS6212 line driver for the transmitter side. This will be a standard twisted-pair…
Part Number: THS6212 Other Parts Discussed in Thread: TINA-TI Hi
THS6212 reference design has the following instructions, +/-0.24V input through the circuit 10 times amplified and output is +/-1V, why not close to +/-2.4V?
Thank you
Jerry
