Hello Asarudeen,
You could use the THS7327 or THS7347 for your application, to buffer one RGBHV signal into two different signals for your connectors depending upon the video standard you need to support.
Best Regards,
Rohit
Hi Dhaivat,
I would recommend using a 75-ohm termination at the input and 150 ohm (75ohm series + 75 ohm load) termination at the output of the THS7316 to get the right sharpness. The THS7316 has a gain of 6-dB which allows the signal to be divided…
Other Parts Discussed in Thread: THS7347 , THS7327 Dear Sir,
Is possible to provide hyperlink to download THS7327 and THS7347 tool & USB driver ?
Many thanks !
Thanks, Larry. I've had a chance to go through your recommendations and my circuit in detail.
I believe I'll use your TPD7S019 suggestion on both my VGA-IN and VGA-OUT (aka AUX-IN, AUX-OUT). For VGA-IN, I believe this chip will provide ESD protection…
Other Parts Discussed in Thread: TVP7002 , THS7327 , THS8200 Hi,
I am looking for setup TVP7002 registers to convert 576i50 YUV to YCbCr 4:2:2 20bits
TVP7002 input: THS7327 is used to only 1 channel of the TVP7002: Rin1, Gin1, Bin1, VSynch_A, HSynch_A…
Philip,
I do not know of any TI single-chip solutions for either a) or b) but here are some thoughts on multi-chip solutions:
a) I assume each of the three outputs must be able tie to any of the 5 inputs. The multi-chip solution will require 7 ICs…
Randy,
Thanks for your prompt reply.
We are using low pass filters and fixed gain amplifier inside THS7353.
We require a drop in replacement for THS7353 with exactly the same functionality as THS7353.
The part you suggested THS7327 is having…
TI also has a wide range of video amplifiers with integrated filters covering many different video standards. They of course also provide gain.
These are cost effective and would be a much smaller solution than a discrete filter.
Here is a link to…
