Part Number: TIDA-00332 Hi team,
This reference design have let the DC side reach up to 4000Vdc, if this structure suitable for 800Vdc-1000Vdc as well?
If there is any limitation here for higher DC voltage.
Thanks
Best regards
Mia Ma
Part Number: TIDA-00332 Hi there,
found several failures within the reference design found here in Altium http://www.ti.com/tool/TIDA-00332#descriptionArea
Components have other values then shown in the schematic. Other values then in the Simulation…
Mohammad,
We have a few ways to do this.
The first is with our digital product line, which could pass the signal via I2C to the microcontroller: TIDA-00528
You can also do this with our analog devices using a clamping diode: TIDA-00332
We also…
Hello Marcin,
I think with regards to the high voltage measurements you may want to take a look at http://www.ti.com/lit/an/sboa295/sboa295.pdf or http://www.ti.com/tool/TIDA-00332 to assist you.
With regard to you sensing location on the circuit…
Hello Neguse,
Thank you for your post. I can help you.
We have a few examples that I'd like to share with you:
The first is an example from our OPA333 datasheet - section 8.3.4 on page 21, Figure 30: http://www.ti.com/lit/ds/symlink/opa333.pdf…
Hi Jason Bridgmon,
Thank you with all my heart for pointing out the possible difficulties that will encounter from the design attached to the earlier post.
I have gone into detail through the suggested reference design TIDA-00332. And it is the right…
Other Parts Discussed in Thread: TIDA-00332 , INA138 This is in regards to the TI reference design titled "High Voltage 12 V – 400 V DC Current Sense Reference Design" (TIDA-00332). I recreated the design with the only difference being that instead of…
Part Number: INA168 Other Parts Discussed in Thread: ISO1541 , TIDA-00313 , INA226 , TIDA-01608 , ISOW7842 , INA260 , OPA333 , TIDA-00528 , TIDA-00332 , INA138 , AMC1100 , AMC1200 , INA149-EP Hi All,
URGENT!!
I want High side current monitor, low…
