Part Number: TIDA-01513 Hi,
My customer need assistance.
In schematic:
https://www.ti.com/lit/df/tidrw46/tidrw46.pdf
U6 is supplied by 5V.
But in BOM:
https://www.ti.com/lit/df/tidrw47/tidrw47.pdf
U6 is described as 12V.
Should U6 be changed to PN:1462041…
Part Number: TIDA-01513 Hi,
Customer had a question for this design. It mentions in the image below that it can be complex to calculate the isolation leakage due to capacitors between HV and chassis and the customer will likely have 2uF y-capacitors between…
Part Number: TIDA-01513 Hi Team,
My customer is trying to find the software files for the TIDA-01513. Can you please share them with me? The User's Guide has a hyperlink to the files but it's not on the tool folder.
Thanks, Mitchell
Part Number: TIDA-01513 Hi team,
Can you please help with below queries?
Sno.
Page no.
Section
Sub Section
Doubt
1
13
3.2
Figure 15
Please clarify if all the mentioned ‘R’ are equal for the load card. And suggest the value and…
Part Number: TIDA-01513 Hi,
Do you have an updated ETA on when the updated TIDA-01513 design will be released? If it is not very soon can you please release at least the updated schematic before the datasheet is ready?
If none is available can you please…
Part Number: TIDA-01513 Other Parts Discussed in Thread: OPA320 Dear Team
I have modified the HV measurement section of TIDA-01513 for 1000V battery application and working ok. But ISO_POS and ISO_NEG are not working while doing simulations. I am using…
Part Number: TIDA-01513 Tool/software: WEBENCH® Design Tools Hello there. I work as a research and development engineer at a company producing buses in Turkey. We are working on a trolleybus project that we are working on as a prototype.
The most important…
Hi Tristan,
Unfortunately we dont have any TIDA-01513 boards available. We're happy to provide you with the documentation and to support you with whatever technical help you may need, however.
Please let me know if you would like to discuss further…
Part Number: TIDA-01513 Other Parts Discussed in Thread: AMC1301 Hello
During testing of a design based on TIDA-01513 ,I experience some voltage drops in the ADC_BAT do you have some experience regarding this?
Thanks for your help