Hi McKenzie,
thanks for your support.
For the second question I'll try to use and design in my schematic and pcb layout, hope to have a good feedback.
Instead, I've found a mistake in this evaluation board: https://www.ti.com/tool/TIDA-01633 if…
Part Number: XTR305 Other Parts Discussed in Thread: TIDA-01633 , XTR300 , TINA-TI Hello,
I am using the XTR305 to generate a 0-10V and 0-20mA from a 3.3V PWM or DAC input signal.
My problem is that the output (in voltage mode) is 15V and does not…
Part Number: XTR305 Other Parts Discussed in Thread: TIDA-01633 , OPA197 Hi Sir
i saw TIDA-01633 use XTR305 to do PWM to 0-10V
If I use single power supply ,can I design PWM to 0-24V?
or you have better solution to do "PWM to 0-24V"
Tha…
HI Joe,
Below are a few XTR300 and XTR305 reference designs that could be of interest.
XTR300: TIDA-00454 , TIPD155
XTR305: TIDA-01633
Thank you and Regards,
Luis
HI Shibin,
As Kai has mentioned, on the current transmitter application, the main issue with the Howland Current source configuration is that could be sensitive to capacitive/inductive load and will likely become unstable while driving a long cable…
HI Shiblin,
- The XTR111 is a current output transmitter. On the multiplexer circuit above, when selecting the RLOAD = 249Ω, the resulting output voltage will change with any additional load impedance or resistance applied at the output of MUX U38.…
Hello Tamara,
Thank you for your reply and sorry for making your confusion.
Left side is picture from TIDA-01633 which is using XTR305. This design has shared voltage and current output terminal.
I want to separate voltage and current output terminal…
Rich
There are several example circuits in the data sheet, but here's an example of an AC/Servo Drive Reference Design:
www.ti.com/.../TIDA-01633
Is this the sort of thing you're looking for?
Regards
Dennis
If this answered your question…
Part Number: XTR305 Other Parts Discussed in Thread: TLV431 , TIDA-01633 , TLV431A Dear experts,
I designed a circuit to have an analog voltage output (+-10V) and I used the XTR305 with PWM control mode (PWM is set from uC). I followed design rules…
To find reference designs leveraging the best in TI technology – from analog and power management to embedded processors, visit https://www.ti.com/reference-designs/index.html . All designs include a schematic, test data and design files.
I will link…
