1. for collecting T1-mode meters we recommend to use CC1125 (with 40 MHz XTAL) or CC1310.
An example source code project for a T-mode Data Collector with CC1125 is found in:
www.ti.com/.../TIDC-DSSS868WMBUS-DC
Note 1: that this CC1125 code is NOT…
Hi Jimmy,
Both of these designs do not implement a complete todays AC Charger.
TIDA-00637 covers most of the system blocks for an AC Charger:
-Pilot signal generation but OPA171 must be replaced by TLV1805 to comply to newer requirements -GFCI with…
Hi Carl,
I understand your point on the dc blocking capacitor however in for practical applications there are parasitics associated with the capacitor package, board parasitics, non-idea 50 ohm source, etc that come into play here. Thus if you were…
Other Parts Discussed in Thread: CC3100 , TIDC-CC3ANTENNA-SELECTION Hello,
We are using CC3100 in our project. regarding power input , in the datasheet preregulated input is mention.
but the input is 1.85V. where as with VBAT it is 3.3V.
The question…
Other Parts Discussed in Thread: OPA392 , OPA182 , OPA186 How do Precision Amplifiers fit into my Grid Infrastructure design?
Overview Presentation:
Precision Amplifiers in Grid Infrastructure - Slide Deck
Featuring designs for Rogowski Coils…
Other Parts Discussed in Thread: CCSTUDIO I am trying to turn our IDE project into a command line build using Nant. I am getting stuck because the makefile is not being generated. The .project, .cproject, and .ccsproject files are in source control and…
V/Hz -> http://www.ti.com/tool/sprc110 . It is a solution for 24x family, but you should get the gist of it. aci1_10.pdf If you are looking for already made solution Optidrive E3 for Single Phase Motors is one example www.invertekdrives.com/.../ But other…
Hello Nguyen,
Thank you for the information that your design is basically a copy of the TIDC-CC3200SMARTPLUG power supply section. That tells me that the design is already proven and we can concentrate on your physical implementation of it, instead…
Other Parts Discussed in Thread: UNIFLASH CCS constantly returning this error message when entering debug mode on a M35H52C1:
Cortex_M3_0: Error during Flash programming (Flash algorithm returned error code). Operation cancelled.
Cortex_M3_0: GEL…
Other Parts Discussed in Thread: TIDC-SMARTPLUG-WIFI , CC3200 Dear All,
One of our customer have designed our SMART PLUG PCB with the reference of TI TIDC-SMARTPLUG-WIFI(tidrb17) design.
But they are facing some issues with relay. Relay is not working…
