From the Z-Stack ZNP Interface Specification: "The USB transport exposes the CDC (communication device class). USB interface and exposes a virtual COM port to the host. The host processor would then access this device as a regular COM port device and…
Part Number: J784S4XEVM Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi experts,
I am building a freeRTOS application using SDK RTOS 10.1 for the J784S4 EVM.
I am trying to route an interrupt from main GPIO0 bank0 (pin 11) to the C7x…
Haines Todd said: This implies there is some non-volatile memory in the CC2538 other than the program ROM that is getting stuck at certain values (hence reflashing it is the only way to change it).
I think you're correct, and "restarting everything…
I think it is not due to the SMB activated, as we can reproduce the issue with TUSB4041I evaluation board, which is operating as stand alone and SMB disabled.
We tried to isolate the issue further by testing with different host devices.
Same hub disappearing…
Hello Oscar,
Thanks for reaching out to our team on E2E. Please see this application note on battery V- configuration insulation monitoring from BQ team.
731 IR detection app note 10.3.pdf
Best regards, Tilden Chen
Solid State Relays | Applications…
Hi Dan,
Thanks for the detailed description. Could you try the following test?
With SW3 disabled to enable normal operation into main app, power on your EVM with the SPI Cheetah adapter connecting the EVM to your host computer.
When PROJ_ON is toggled…
SDK 9.2 Issues:
The tiboot3.bin has a size > 512 KB which causes issues.
Hence the workaround would be to remove CONFIG_SPL_FS_LOADER option from r5 defconfig and rebuild tiboot3.bin.
SDK 8.0 Issues:
Please follow the below FAQ for…
Part Number: SIMPLELINK-CC13X2-26X2-SDK Other Parts Discussed in Thread: Z-STACK , SIMPLELINK-CC13XX-CC26XX-SDK I'm trying to figure out how to commission a green power device through a Simplelink 6.30 ZNP.
In the docs I see the following:
- ZNP includes…
Part Number: CC2652P Tool/software: Hi Ti Support,
I am looking for solution of Thread & Zigbee for linux host.
If one CC2652 flashed with the operthread rcp FW and another one CC2652 flashed with the zigbee znp FW, and they have separate antenna…
Ryan Brown1 said: First, here is a more legible version of the ZNP README .
Thank you, While I'm quite versed at reading HTML, I also had the file locally and just opened it in a browser :p but for all googlers this certainly will be useful in the future…
