Electric vehicle (EV) charging systems are of two types: AC and DC. The AC charging system has to interface with the EV's internal on-board charger (OBC) before reaching the battery. The DC charging system interfaces with an external Electric Vehicle…
Saurabh,
I'm still not sure what your issue is with the description you have given so far and the video you have provided. I'm assuming here the MSP430 is controlling the LCD, and I see the LCD coming on each time. I do not recommend rapidly turning…
Hi guy,
ESD protection is to make your system more robust. You can add ESD diode, Cap, or resistor to limit the damage.
ESD protection has different level. Mostly to do this, is because you need to pass ESD test.
TIDM-3PHMTR-TAMP-ESD is not a product…
Part Number: MSP430F2274 Is anyone out there using the hardware/firmware reference platform for the TI MSP430-GBD (Glass Breakage Detector) ? I've bought a few of these and they do not work reliably at all. Any feedback would be appreciated. Here is my…
Hey Gaurav,
Based on the TIDM-BIOSIGNMONITOR User's guide, section 3.1.2, the human skin resistance can very between 20 M ohm to 50 ohms. This circuit was designed to be able to measure this with good resolution and keep the output between the MSP430…
Hi Carolus,
Peter makes a good suggestion, the NDK with TI-RTOS would likely be the best source for TCP/IP examples.
I'll add in that TivaWare has an lwip stack within it that can be used for TCP/IP as well, and we do have a TI Design which leverages…
Hi All,
I have got an OLIMEX kit designed for Glass break detection using TI's Algo. The problem what i am facing is that the glass break detection is very inconsistent. I have modified the code (downloaded from TI's website for Robust design) to change…
Hello Samprati,
We don't have any other examples for the CC3200 - and the example you referenced was done by the CC3200 group and is not supported on this specific E2E forum.
If you want to use the CC3200 with the TRF7970A (the device that is eval…
Part Number: MSP430F6777 Other Parts Discussed in Thread: TIDM-AUX-MODULE Hi, all
We are using many MSP430F6777 for variable devices.
Now, we designed a new PCB for an environment that requests the robustness.
To establish the robustness, we attached…
Dawson -
Sensor interfaces used are/can be digital or analog (depends on the sensor and how integrated you need that to be) - for example, one configuration i have seen to be popular is the muRata IRSB210ST01, used in conjunction with an LPV802 (op amp…
