Part Number: TIPD164 Other Parts Discussed in Thread: INA826 , ADS1248 , , INA159 Tool/software: Hi,
In the reference design of TIPD164, there is only one channel of ADC uses INA826 and INA159. Now I need to design 4 channels with exactly the same preamplifiers…
Part Number: TIPD164 Other Parts Discussed in Thread: INA826 , ADS1248 , , INA159 , INA823 In TIPD164 design, they have used INA826 and INA159 for converting voltage and current source to required range for ADS1248 IC . Why cant we use INA826 directly…
Part Number: TIPD164 Other Parts Discussed in Thread: ADS1248 Dear TI's experts,
i cannot get the results of the Offset (mV) shown Table 6-8 ( https://www.ti.com/lit/ug/tidu491/tidu491.pdf?ts=1630943856512&ref_url=https%253A%252F%252Fwww.ti.com%252Fsolution…
Hi Kai,
We have short tech doc on using the ADS125H02 for +/- 10V measurements here: http://www.ti.com/lit/an/sbaa387/sbaa387.pdf
For current measurements, we don't have any reference designs specific to the ADS125H02, but we do have some reference…
Hi Shreyas,
No, you do not have to use all 16 ADC channels on the ADS1158. You can either select the two channels you want to use and allow the auto-scan sequencer to multiplex (ping-pong) between these two channels, or you can use the fixed-channel…
Hello Zeeshan
Need for group isolation will simplify the design.
The switch and the interface can be controlled using digital isolators.
Please refer the below and note that we may not have solutions exactly matching your requirement.
TIDA-00118…
Hi Purvik,
You should search our library of reference designs for help with this request. Two designs that come to mind that can help you are:
https://www.ti.com/tool/TIDA-00550
https://www.ti.com/tool/TIPD164
The first link uses the ADS1262,…
Hello Ivan,
As you have mentioned, at the input, the XTR105 is intended for a 2-wire RTD or 3-wire RTD probe/sensor. From the output perspective, the XTR105 is a two-wire current transmitter, producing a 4-20mA current output.
Unfortunately, we do…
