Part Number: TIPD193 Other Parts Discussed in Thread: INA326
The TIPD193 BOM <http://www.ti.com/lit/df/tidrf13/tidrf13.pdf>
..dated in the year 2015 contains "78.7 k " in the value column for R3/item #11.
That R3 value is incorrect in that…
Sorry for not replying so Long.
I was moved into another Project and did not find more time to look into that.
I was able to exchange the PCB with a different one and used another sensor (5k resistance instead of 10k). So the gain resistors are…
The REF200 is still a good approach if you are looking for a single ended output. The TIPD193 reference design goes over how this system works and how to calculate the appropriate component values. The reference design page also has the design…
Hmm I think this might be related to the connections
Pin 6 should be connected to GND.
You can use this TIDA schematic as an example
This is also a bit overkill for a 100uA current source. have you thought of using figure 8 of the following app note?