Part Number: TL3472-Q1 Other Parts Discussed in Thread: TL082-Q1 Hello,
Could you please let me know the slew rate variation of the following conditions? 1. Slew rate vs. Vcc+=10V to 16V, Vcc-=0V 2. Slew rate vs. temperature (Ta=-40C to +125C)
Best Regards…
Other Parts Discussed in Thread: TLE2142 , TL3472 Hi all Would you mind if we ask TLE2142 and TL3472? Our customer would like to use TLE2142 and TL3472 with single supply 0V to 36V. Is it possible? Because we can't find VS=(Vcc+) - (Vcc-) on Absolute Maximum…
Yamada-san
The datasheet does not specify, but there is sample data for TL3472CD (similar die but different BOM) that passes 3kV HBM and 2kV CDM. May I suggest TLV9352 that outperforms TL3472 and has ESD ratings specified?
► Part Number
TL3472
…
Hello Li,
That is the bottom look at the top.
A similar post here (bottom markings) ; https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1066607/tl3472-bottom-side-part-marking-question-tl3472id-r
Hello, I apologize for the long response. Too much work. I ran tests on the LM358P Texas Instruments chip, but the Circuit didn't start. I have a suspicion that THIS lm358p chip is a fake.
TL3472, TLC082 , TLE2142 , LM6142, LMC6132 in our country…
Hello Brian,
The term single supply (in the device title) means that input range includes the negative supply rail so that rail can be grounded. It also means that the output range gets close to ground but maybe not all the way. TL3472 VOL is typically…
Mohana,
The biggest issue was that op amp U2 had the power supply connected backwards. It took me over 10 minutes find that one.
The second issue is that the input common mode rejection is poor because the input difference amplifier wasn't balanced. I…
Hao,
The op amps that do not have input to input diodes are designed in a way that the inputs can naturally tolerate large difference such as 15V and 5V. TL3472, OPA2990, and TLV272 are three examples of devices that do not have and do not need input…