Part Number: TLC2272-Q1 Dear team,
For the supply voltage, my customer's application voltage is +- 9V, 1V over than spec defined value, and this project has been released. My customer wants to know how risky this project is.
Thanks & Best Regards…
Hey SunSet,
Please see the following post regarding the G4 suffix on devices.
https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/621036/tlc2272-q1-what-is-the-different-between-the-part-with-4g-and-without-4g
Best, Jerry
Hello Haiyong,
Can you tell us the purpose behind the question about the "nm technology?" We don't usually describe linear circuits such as op amps in terms of their minimum geometry feature size like which is more common for processors and similar…
Hi SG,
Sébastien GRANDIN said: 1- Can you confirm that Ti has decided to split the M-MIL datasheets for a few years now ?
I looked up our database and back in 3/2016, TLC2274/TLC2274M/TKC2274AM were specified together. I believe the split is likely…
Part Number: TLC2272A Other Parts Discussed in Thread: TLC2272A , TLC2272 I am using the TLC2272A opamp to detect peak current in a PWM-controlled LED driver.
Typical Operation:
In the schematic below, the PWM control signal is applied to the gate…
The OPA145 also looks like a good choice, this file has not been recently updated so the OPA196 is not in yet, and the pricing is out of date.
OPA111A options.xlsx
to User473,
I searched all the op amp portfolio with the parametric search (precision, general purpose, and high-speed). There are 6 options with temperatures of 150C and above (see attached). The best match is the OPA211-HT (210C max). This is the…
Nick,
Very impressive what you have done so far ! As you might have figured out by now, BC0 will clear the Flash (all bits will become 0x0000 at the end of clear operation).
BE0 will erase the Flash (all bits will become 0xFFFF at the end of erase…
