Part Number: TLC2652 Hello everyone,
I have gone through the datasheet of this IC but only the GBW (Gain Bandwidth Product) is given. Can you please provide the Open Loop Gain of this IC.
Thanks & Regards Arjun
Part Number: TLC2652 Hello,
We use a TLC2652AC in one of our designs. Currently we have a batch of assemblies with higher than normal error.
The IC have the the following marking:
TLC2652AC
TI-LOGO 3AM
AKRD
Another good performing batch has IC with…
Part Number: TLC2652 Other Parts Discussed in Thread: OPA188 , OPA189 , THS4001 Hi,
I am using TLC2652 in a composite circuit wherein the Cxa and Cxb are connected to VDD- as per datasheet.
The circuit is as shown below.
I am observing the output to be…
Other Parts Discussed in Thread: TLC2652 , OPA170 , OPA333 , OPA188 Hi Everyone,
I am trying to use TLC2652 in inverting unity gain configuration to invert my DAC DC output.
I followed the below schematic for my design. additionally, placed a 0.1uF cap crossed…
Machida-san,
In comparing TLC2652 and OPA182 input bias current (IB) you must consider supply voltage and operating temperature.
At room temperature, IB in both op amps is comparable as it is dominated by the integrated value of the current spikes…
The INA333 would map 5 µA to 0.5 V. If you wanted 5 V, you would need a transimpedance in the order of 1 MΩ, but I doubt that there is any such INA.
But why do you want to use an INA? You could build a plain transimpedance amplifier with an…
Other Parts Discussed in Thread: TLC2652 Hi,
I am using TLC2652 on my evaluation board. I need help for LAYOUT instruction for it. Basically I like to know, if there is ground plane below this amplifier in other layer, will it affect TLC2652?
Thanks and…
Other Parts Discussed in Thread: TLC2652 We’re using the TLC2652 in a hybrid. It is hooked up to +/-5VA and must pass both positive and negative signals. The question is, would it be better to hook up the S/H caps to AGND or -5VA (VDD-)? The app…
Part Number: THS4001 Other Parts Discussed in Thread: TLC2652 , Hi,
I am using the composite opamp with TLC2652 (chopper stabilized opamp) and THS4001 (High speed opamp).
If the input voltage is -5V from the battery V1 without the AC input, the expected…
Hi David,
The TLC2652 and ICL7652 have an absolute maximum supply rating of +/-8 V. The intended supply is +/-5 V and the Electrical Characteristics tables are written around this supply; however, according to the Recommended Operating Conditions table…
