Search tips
Showing 19 results View by: Thread Post Sort by

  • TLE2062A: TLE2064, TLE2061, TLE2062

    TI Thinks Resolved
    Part Number: TLE2062A Please provide ESD ratings (HBM) Range for the above part number series

  • RE: TLE2062AM-D: Spice model

    Hello Pranay, The commercial version spice model should be a good alternative. https://www.ti.com/product/TLE2062A#design-tools-simulation TLE2062, TLE2062A, TLE2062B PSpice Model
    • Answered

  • TLE2062: Output Impedance when both Power Rails are Grounded

    Resolved
    Part Number: TLE2062 My customer is asking the following about the TLE2062: I am using the TLE2062AMDREP in an application where, in certain circumstances, I ground the VCC and VCC– rails in order to guarantee that the output is driven to zero. I had…
    • Resolved

  • TLE2062 input capacitance

    Other Parts Discussed in Thread: TLE2062 Hi, As per datasheet the input capacitance is 4pF. Can you please provide input differential capacitance and common mode capacitance separately? Thanks.

  • TLE2061/TLE2062 Open-loop Output Impedance mismatch between TINA model and Datasheet

    Other Parts Discussed in Thread: TLE2061 , TLE2062 Hi, As per datasheet the open-loop output impedance of TLE2061 and TLE2062 are 280 ohm and 560ohm respectively. But in TINA simulation I am getting open-loop output impedance as 140ohm. Can you please clarify…

  • TLE2061 & TLE2062 Spice Model

    Other Parts Discussed in Thread: TLE2061 , TLE2062 Hi, As per datasheet the open loop impedance for TLE2061 and TLE2062 are different (280 and 560ohm), how to take care this change in Spice model from datasheet? For which device the spice model is provided…

  • TLE2062 short circuit current

    Other Parts Discussed in Thread: TLE2062 Hi, In the datasheet figure 20, SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME, is this graph applicable to all packages of the op-amp? How can I get a graph of short circuit current vs Elapsed time for TLE2062AMD…

  • TLE2062 Output Impedance

    Other Parts Discussed in Thread: TLE2062AM Hi, The open loop impedance of TLE2062AM is given as 560 ohm. Why it is very less in Figure 23? Thanks, Shihab.

  • TLE2062 Excess Current

    Other Parts Discussed in Thread: TLE2062M , TLE2062 , OPA192 , OPA2313 , OPA2376 , OPA2340 , OPA2141 , OPA2140 , OPA2314 I am using 1/2 of a TLE2062M as a comparator. I find that when the VID increases from 0 to 1 volt, the supply current goes from 0.44mA (within…

  • TLE2062 output swings 150mv based on load impedance below 80K

    Other Parts Discussed in Thread: TLE2062 4061.bruce_TLE2062.docx The application in question regards bipolar outputs generated from TLE2062’s- +/-5V, 10V, etc. These are DC levels based on a 7611 DAC output connected to various customer load applications…

Didn't find what you are looking for? Post a new question.