Search tips
Showing 32 results View by: Thread Post Sort by

  • TLV1805-Q1: For Control pilot function

    TI Thinks Resolved
    Part Number: TLV1805-Q1 Other Parts Discussed in Thread: TIDA-010071 Hi, Support Team for AC charging Pile of control Pilot function, we reference J1772 EVSE Prototype and TI TIDA-010071 we choice TLV1850-Q1 ref :J1772 EVSE prototype ref :TIDA-0100…

  • TLV1805-Q1: Alternative part to TLV1805-Q1

    TI Thinks Resolved
    Part Number: TLV1805-Q1 Hi there, I've just finished my design but now this chip is out of stock. Are there alternatives to this chip? Kind regards, Laura
    • Answered

  • TLV1805-Q1: output voltage and minimum current

    Resolved
    Part Number: TLV1805-Q1 Other Parts Discussed in Thread: TLV1805 Dear team, 1. When +IN>-IN, output = V+; when +IN<-IN, output = V-, right? 2. For the minimum reverse current, I don't know why we need to compute this value. Could you please help explain…
    • Resolved

  • TLV1805-Q1: TLV1805-Q1 IN- sink current

    TI Thinks Resolved
    Part Number: TLV1805-Q1 When pin IN- withstands 12V, how much current does it sink? At this time, the other pin voltages are 0V
    • Answered

  • TLV1805-Q1: TLV1805-Q1 tina model does not work with Vpwr- at non 0 voltage

    Resolved
    Part Number: TLV1805-Q1 Other Parts Discussed in Thread: TLV1805 If you add a 500V offset to tina model, it does not work. below output should be 515V yet it is 500V (i.e. off).
    • Resolved
    • Answered

  • TLV1805-Q1: Drive an electromagnetic break

    Resolved
    Part Number: TLV1805-Q1 Other Parts Discussed in Thread: TLV1805 , TIDA-020023 , TPS1H200A-Q1 , ISO1212 , CSD87502Q2 Hi, I have to drive an electromagnetic break of a brushless dc motor, it has a rated voltage of 24Vdc and a switch to sense if it's manually…
    • Resolved

  • TLV1805-Q1: Use TLV1805-Q1 to realize a hysteresis comparator

    TI Thinks Resolved
    Part Number: TLV1805-Q1 Other Parts Discussed in Thread: TLV1805 , Hi, We want to use TLV1805 to realize a hysteresis comparator. The V+(Vcc) is 5V, but we need the high threshold to be 5.4V and the low threshold to be 4.5V. How can we realize it? And…
    • Answered

  • TLV1805-Q1: Marking Question

    Resolved
    Part Number: TLV1805-Q1 HI, My customer reported that they found two device markings on TLV1805-Q1, those are 1PJF and 1ULF, but there is no 1PJF according to our datasheet, so what's wrong here? Thanks.
    • Resolved

  • TLV1805-Q1: Question about the comparator output pin voltage

    TI Thinks Resolved
    Part Number: TLV1805-Q1 Dear team, Vin=12V, and the voltage at the point marked red circle is 16V. Under such conditions, will the output(PN1) pin be damaged? Thanks & Best Regards, Sherry
    • Answered

  • TLV1805-Q1: Lack of tape and reel information on the datasheet

    Resolved
    Part Number: TLV1805-Q1 Dear team, My customer needs the tape and reel information about this device, but I can't find it in the datasheet. Could you please tell me where can I find that? Thanks & Best Regards, Sherry
    • Resolved

Didn't find what you are looking for? Post a new question.