Part Number: TLV1811 I'm trying to simulate using PSPICE for TI a TLV1811 comparator circuit sensing an OV condition (back-emf).
Operating voltage is around 100V, so I must use a floating circuit (D36,R181 and Q2) in order ro meet its maximum operating…
Part Number: TLV1811 Other Parts Discussed in Thread: TLV1805 Hi team,
Can you recommend a comparator with a wide supply voltage range and a Max POR time within 300us? Need to be faster than TLV1811
Thanks
Lillian
Part Number: TLV1811-Q1 Hi team,
I have questions.
Compared to open-drain, does push-pull emit bigger noise because of rapid current sink/source?
Does this topology difference have big impact on circuit design from the aspect of EMI?
Best Regards,
Apology Chi,
But still unable to receive updates from customer other than their request for application design of TLV1811 with the information provided.
Regards, Archie A.
Part Number: TLV1811 Hi team,
this curve mean the sinking current under different output voltage , right?
so does this mean the sinking current will gradually decrease as the output voltage drop to 0?
Part Number: TLV1811 Other Parts Discussed in Thread: TLV1821 , UCC256404 , TLV3201
Hi team,
we want to use TLV1811 to pull low below 0.9 threshold,
but there's other divider resistor on the output of TLV1811,
we need to know the internal pull-low…
Part Number: TLV1805 Other Parts Discussed in Thread: TLV1811 , TL331 Hello,
I'm looking at the TLV1805 single sot23 comparator for a new design. Nice device but I'm a little concerned that
It does not share a common pinout with other similar comparators…
The TL071 is an analog amplifier (so it would have slow edges) and does not have rail-to-rail outputs. A comparator like the TLV1805 or TLV1811 outputs a digital signal at its power rails.
Part Number: LM2903-Q1 Other Parts Discussed in Thread: LM2903B , LM339 , TLV1811 Why the red circled part are 10M and the other resistors are 10k, if we change the 10M to 10k, what will happen and why?
To insert an image, you must use the "Insert"/"Image" menu at the bottom of the edit box.
The TLV1701-Q1 has an open-collector output, so the speed of rising edges depends on both the pull-up resistance and the load capacitance. To…