Part Number: TLV2460 Dear Sir or Madam,
Please could you inform me about terminal finish for each one of the 2 parts TLV2460IDBVR & TLV2460IDBVT. Please could you tell me the thickness of Au in case the terminal finish is NiPdAu or NiAu or Au.
…
Part Number: TLV2460 Hello Team,
The TL2460 has a shutdown pin, which does not appear to be specified in the Absolute Maximum Ratings table in the data sheet.
Should the absolute maximum negative rating of the /SHDN pin be '-0.5V' like any other…
Part Number: TLV2460 Other Parts Discussed in Thread: TINA-TI , TLV2464 , AMC1200 , TL431 Hello everyone,
I have inherited a circuit in which multiple reference voltages are derived from a single reference voltage: resistance divider outputs are buffered…
Part Number: TLV2460 Hi,
Please let me clarify my understanding the VID of TLV2460. I understand that the VID means that the voltage at the non-inverting input with respect to the inverting input. So it means that TLV2460 allow to input VDD+0.2V between…
Part Number: TLV2460-Q1 Dear all,
*Could you teach me your recommend device?
>Condition
input signal: square wave with some mega heltz(max)
output: 1nF capacitance, (and we think to add resistor in series)
Rail: Out
Gain: x1 (voltage follower…
Other Parts Discussed in Thread: TLV2460 Hi, I am using a TLV2460 OpAmp as a voltage follower. 99% of the time (99% DC) there is a 2.65V difference in the non-inverting input and the output of the OpAmp. The non-inverting input sees 2.65V, while the output…
Part Number: TPS7A39 Other Parts Discussed in Thread: TPS7A47 , TPS7A94 , TPS7A30 , LMP7731 , TLV2460 Tool/software: Hi, I'm designing a very low noise amplifier circuit.
Do you have something better than TPS7A39? I need to regulate negative and positive…
Hello Renan,
Thank you for your patience. Unfortunately, we do not seem to have the ESD data for this exact part.
The good news is that we do have data for the TLV2460 part, which is a very similar part. The data is for SOIC and not for the SOT-23…
Hi Eli,
The recommended operating conditions table on page 4 of the TLV2460 data sheet lists the supply voltage as 1.8 to 3.6 V. Two AAA batteries providing 2.4 V to the VDD pin should be fine.
Regards, Thomas
PA - Linear Applications Engineeri…
