Search tips
Showing 9 results View by: Thread Post Sort by
    Answered

  • TLV2721: Cannot export

    Resolved
    Part Number: TLV2721 Other Parts Discussed in Thread: TLV27L1 Hi Team, Im using Filter Design Tool and Im trying to export the design but the "Export Design" is grayed out. When pointed in the mouse there is note "SPICE model unavailable for TLV27L1. Choose…
    • Resolved

  • TLV2721: Can't Export From Filter Design Simulator Tool to TINA

    TI Thinks Resolved
    Part Number: TLV2721 Other Parts Discussed in Thread: TINA-TI Hello All, I was trying to export a design and it says the export failed - there's no Spice model for TLV2721CDBVT - I changed to another OpAmp and the export still failed. Is the export…

  • RE: TLV2721: TLV2721IDBVR ESD-HBN/CDM data

    Takasugi-san, For existing designs , TLV9101 is not a replacement because TLV2721 has an odd power supply pinout. TLV2721 is one a few devices that swap the power pins (ground on pin 5). The vast majority of SOT23-5 op maps place GND on pin 2. For new or…
    • Answered

  • TLV2721: Do you have a maximum current rating at 10V Vdd?

    Resolved
    Part Number: TLV2721 Other Parts Discussed in Thread: TLV9101 Hello team, Customer want to know maximum supply current at 10V VDD. I understood the value is 200uA at 3V and 5V, will this same value at 10V as well? If you can't share publicly, please contact…
    • Resolved
    • Answered

  • LMC7101: Substitute with higher capacitive load drive

    Resolved
    Part Number: LMC7101 Other Parts Discussed in Thread: LMC7111 , TLV2711 , TLV2721 , TLV2731 Hi, I'm looking for a replacement of the LMC7101 with the same pin-out . The replacement must have a higher capacitive load drive capability. I have tried the…
    • Resolved

  • RE: Filter Design Tool Export Fails

    Hey John, This seems to be a duplicate question from the question linked below. I am closing this thread to consolidate responses to one thread. https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1126171/tlv2721-can-t-export-from…

  • TLV2721 input power pins reversed?

    Other Parts Discussed in Thread: TLV2721 , OPA2237 , OPA244 , OPA237 Hello, I am new to TI from National. I was looking for a single opamp with the following characteristics: power from 10V, ground input common mode range, slew rate around 1V/uS, and very…
    • Answered

  • RE: LMC7101: Pin-to-pin compatible part with lower offset?

    Resolved
    Hello Heinrich, FYI: The following devices have the same pinout as the LMC7101 (V+ on 2): LMC7111 (micropower version of LMC7101) TLV2711 (50kHz, 3mV) TLV2721 (510kHz,3mV) TLV2731 (2MHz, 3mV) TLV6001R (1MHz, 4.5mV)

  • LMC7101AIM p2p compatible with low offset

    Other Parts Discussed in Thread: LMC7101 , TLV2721 , TLV2711 , TLV2731 , OPA170 Hello team, Too have better performance in an old board, my customer would like to found an AOP p2p compatible with the LMC7101AIM with a better offset, The main point is to find…

Didn't find what you are looking for? Post a new question.