The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: TLV3011-EP Other Parts Discussed in Thread: TLV3011
TLV3011-EP
We have seen a problem with the TLV3011 comporator with built-in reference.
At some component the referent start to increase from the normal 1.24V at temperature under -31C…
Part Number: TLV3011-EP
Within the paragraph "board layout" , it is written that 1uF of decoupling capacitor is suggested. But on Figure 22 a capacitor of 10uF is shown.
Could you please inform me what should be the proper value of decoupling…
Part Number: TLV3011-EP Other Parts Discussed in Thread: TLV3011 Hi,
We are using TLV3011-EP comparator with internal reference to detect undervoltage on a supply rail and the compartor is powered up with 5V.
It is observed that the output got latched…
Part Number: TLV3011-EP Hello,
There appears to be no mention of output leakage/cutoff current when the open-drain output is logic-high. This seems to be missing from both the TLV3011-EP datasheet as well as the non-EP version. I would like to know what…
Part Number: TLV3011-EP Other Parts Discussed in Thread: TLV3011 Hello Guys,
Our customer have tied the outpun pin of TLV3011-EP to a supply of 13V. His implementation is currently working, but will this eventually damage the device?
Here is his connection…
Part Number: TLV3011-EP We have had several parts fail due to the voltage reference at pin 5 rising from a nominal 1.24 volts to 1.98 volts when the part goes below -25C. The voltage reference will return to nominal after the part rises above -25C. I…
Part Number: TLV3011-EP We have a TLV3011-EP ( TLV3011AMDBVREP ) where the reference output goes from 1.25v nominal at ambient temperature to about 3.58v when the temperature is less than -40C. We are suspicious as this is our only failure out of about…
Part Number: TLV3011-EP Other Parts Discussed in Thread: TLV3011 Hello,
Looking at the TLV3011 (non-EP) datasheet, the Voltage Reference is specified as [1.230V, 1.242V, 1.254V], which corresponds to 1% accuracy (also specified in the datasheet), hence…
Part Number: TLV3011-EP Other Parts Discussed in Thread: TLV3011 Hello,
We're using the TLV3011-EP comparator to track a nominal 28Vdc input to detect an Undervoltage condition. To reduce power draw and the effect of high-voltage transients, the R1/R2…
