The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: TLV3011B Other Parts Discussed in Thread: TL103W , TSM102 , REF3325 Hi team,
As title, do we have function similar but REF voltage level is 2.5V?
Thanks
Hi Klaus,
Like Clemens said, the TLV3011B-Q1 and TLV3012B-Q1 have reference pins.
Another option could be the TLV192x Family of 65V Comparators with Integrated 2.5V Voltage Reference datasheet , which is a newly released device 65V comparator with a 2.5V…
Hi Vincent,
For the TLV3011 (Non-B Version), the inputs are clamped to the supply pins such that the allowable input voltage range is -0.2V to 0.2V (if V+ = 0V):
An input voltage of 0V to 3.6V while the TLV3011 is unpowered is not a valid condition as…
Hi Benjamin,
Unfortunately, we don't create IBIS models for our comparators. We provide models for TINA-TI and PSpice-for-TI such that the user can see DC and transient behavior of the device at typical specs. You may use the TINA-TI and PSpice-for-TI…
Dear Paul
Many thanks for the quick response, we truly appreciate it.
Our design needs to function down to -54°C, and all units undergo testing at this temperature. Therefore, it’s crucial for us that components are specified for such low temperatures…
The TL331B's input bias current is typically less than 4 nA, but up to 50 nA in the worst case. If you care, consider using a CMOS comparator instead.
There are very few comparators that allow to be connected to an input signal when powered off. Two…
