Part Number: TLV9032 Other Parts Discussed in Thread: TLV3201 , TLV9022
To give you a brief,
The Aim of the activity is to Add zero crossing detection to the current circuit. The Circuit shown in above figure shows output of a CT connected to Amp for current…
Part Number: TLV3201 Other Parts Discussed in Thread: TLV7011 Hi team,
When TLV3201 powers up, the negative voltage is higher than the positive voltage and the Vout still has a pulse.
This affects the normal operation, can you help identify the cause…
Part Number: TLV3201 Hello,
it may happen that we get negative voltage at the + input. According to my simulation model: With an internal protection circuit, which has the diodes installed, which have more than 0.3V voltage drop, leads to a switching…
Part Number: TLV3201-Q1 Other Parts Discussed in Thread: TINA-TI , TLV3201 Hi Team,
Can you help explain how to calculate the VOH and VOL of this device at any temperature? Can you help me with these? Is there an application note that I can check?
I searched…
Part Number: TLV3201 Hello guys,
One of my customers used a part of one reel of TLV3201AIDCK for their several products two years ago.
Now they are going to use the remain TLV3201AIDCK of the reel for their newest product.
But the device floor time has been…
Part Number: TLV3201 Hello,
The TLV3201 layout guidelines on Page 19 suggests the following:
"For slow-moving input signals, take care to prevent parasitic feedback. A small capacitor (1000 pF or less) placed between the inputs can help eliminate oscillations…
Part Number: TLV3201 Just to report an incorrect layout example in the datasheet of TLV3201. SC70-5 and SOT-23 packages only have 5 pins, but layout added one extra connection.
Part Number: TLV3201 Other Parts Discussed in Thread: LM339 Hello,
I was reading the tread titled: TINA/Spice/TLV3201: TINA Spice model shows output inverting with large signal, and it looks like the Spice Model for the TLV3201 was either updating or…
Part Number: TLV3201
Hello,
The datasheet propagation delay parameter is not matching with the simulation for sine input.
The delay with the sine input is 996ns which is not matching with the datasheet.
I have checked the same simulation with PWM input…
Hey Scott,
I cannot view your phone number on your profile for E2E. Please accept my friend request and we can privately message contact info and set up a time to talk that is most convenient for you.
Thanks,
Joe