Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3202 Tool/software: Hi,
Had some query regarding the failure mode analysis of the opamp:
1. What is the system behavior when one of the inputs is open, with input capacitor grounded ?
2. What…
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3202 , TLV3201-Q1 , TLV3601EVM Tool/software: Hi team,
Could you tell me what is the minimum output pulse width of TLV3202-Q1? Is it the same of propagation delay time(around 40ns)?
Thank you,
…
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3201-Q1 Tool/software: Hi Ti Team,
Please provide below mentioned part numbers Failure modes details.
1. TLV3202-Q1
2. TXB0104QRUTRQ1
3. SN65HVD1781QDRQ1
4. TLV3201-Q1
5. LMV321Q1M5X/NOPB
Tha…
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3202 How to design TLV3202 with ac hysteresis ? Are there any reference documents available ?
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TINA-TI Jose Maroto Could you please support on this request ?
Need unencrypted Model for TLV3202AQDGK*Q1
Thank you,
Othmane
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3202 , TLV9032 , TLV7032 , LM393LV
Hi
below is the circuit, during test, TLV3202 is easy to be damaged, mainly focus on pin 3, when pin 7 output 5V, pin 3 is 1.69V or 3.72V, it is 5V for good board…
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3202 Hi team,
I have an issue in using TLV3202 as a comparator. While testing I supply Non inverting input (IN+) with frequency signal of 50% duty (Typically fat Low - 0V to High-3.3V levels)…
Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3201-Q1 , Hello,
I have two questions on propagation delay time specs of TLV3201-Q1 or TLV3202-Q1.
TLV3201-Q1 or TLV3202-Q1's data sheet specifies its propagation delay times, t PD , but what…
Part Number: TLV3502-Q1 Other Parts Discussed in Thread: TLV3502 , TLV3202 , TINA-TI I am using TLV3502 for fast voltage detections.
- One is for level only
- the second one is for fast zero crossing detection.
Is my circuit ok?...Including polarity? fast_detector_tlv3502…
Hello Hirotaka,
No. 0V and 5V will not damage the inputs. Differential Abs Max is ±5V. But the output condition may not be correct at those levels.
As you saw, the input range limits are (V+) - 2V and (V-) + 1V. The "Common Mode Limits" graphs…
