Part Number: TLV3402
Tool/software:
Hi,
we use TLV3402 in dual window comparator configuration for detection of overcurrent in both directions. Comparator is powered in bipolar configuration +/-5V but output should swing between 0 and 3.3V. Voltage…
Part Number: TLV3402 Hi Team,
My customer was using TLV3402CDR and has received EOL notice 2-3weeks ago, where the LTB was announced to be around December this year.
The customer is confused why the LTB period is only around 3 months, which is significantly…
Part Number: TLV3402 Hi Sir,
When we use TLV3402, We have designed an automatic switching dual power supply circuit. Specifically, pin 6 (2IN-) is used as the reference value of the first power supply, pin 5 (2IN+) is used as the reference value of…
Part Number: TLV3402 Hi team, As shown in the waveform below, the output may drop gradually or momentarily. Could you tell me why this kind of behavior occurs? Sincerely. Kengo.
Part Number: TLV3402 Hi team, I checked the operation for TLV3402. Is this a normal waveform? It drops to Low momentarily. Ch1:VCC Ch2:1IN- Ch3:1IN+ Ch4:1OUT What is the output of TLV3402 when there is no input? Sincerely. Kengo.
Part Number: TLV3402 Dear Team,
Here is Kevin from Delta Taiwan team.
Customer is looking for solution to replace NCS3402D, not sure if we have up to date device.
Or you will suggest TLV3402IDR?
BR
Kevin
Part Number: TLV3402 Other Parts Discussed in Thread: LM2903 , TLC372 Hi, my customer's schematic is as below: U2 is TLV3402.
The waveform of pin 2- yellow, pin 3- green, pin1-blue are shown below:
As we can see, pin2(IN-) is always higher than…
Part Number: TLV3402 Other Parts Discussed in Thread: TLV3401 , TLV3501 , LMV7235 I have a customer that is seeing the following issue with the TLV3402:
There is a glitch at 25 ms where the OUT signal is pulled down. The output is pulled up with a 10…
Part Number: TLV3402 Other Parts Discussed in Thread: TLV3702 , , TLV3691 , TLV7031 I am trying to choose nano-power comparators, either TLV3702 (push-pull output) or TLV3402 (open drain with active low).
I imagine that an open drain output with active…