Part Number: TLV3702-Q1 Our customer has some questions about TLV3702-Q1. I'm posting the questions for the customer:
++++++++++++++++++++++++++++++++++++++++++++++
Our customer would like to know the proper termination method for TLV3702-Q1.
Their…
Hello Zhenyu,
As a follow-up, we received the following response from our Quality group:
"Per TI Terms & Conditions, TI's warranty for devices is one-year after the sale of the part by TI to the customer or the sale of the part from the distributor…
Part Number: TLV3702-Q1 Hi
I would like to know how the device behaves when the input voltage is below 2.7V. (This is minimum voltage at single supply)
Does this device output low level ? or high level ? or unknown?
Our customer is concerned how…
Other Parts Discussed in Thread: TLV3702 Hi all,
I have an interesting problem with a fairly simple comparator circuit that converts a low-level sine wave to 3.3V logic levels to measure frequency. Part of the system is shown below, and was reverse…
Part Number: TLC272 Other Parts Discussed in Thread: TLC27M2 , TLV2170 , TLV3702 , TLC3702 , LMC6762
Tool/software:
Hi ti team,
Firstly, build an open-loop comparator using TLC272IDR, where the 2PIN of the IC is used as the sampling pin, the 1PIN…
Part Number: TLV3402 Other Parts Discussed in Thread: TLV3702 , , TLV3691 , TLV7031 I am trying to choose nano-power comparators, either TLV3702 (push-pull output) or TLV3402 (open drain with active low).
I imagine that an open drain output with active…
Joseph,
For what it is worth, the TLV3702 micropower comparator is based on the TLV2402 amplifier core.
So if you want to use the TLV2402 as a comparator...why not use the true comparator version of the TLV2402! It has the same pinout and will drop…
CC/CV control loop; ADS131M08 current sense
U/OVP ; C2000 ADC
OCP ; C2000 ADC
Reverse battery insertion ; tlv3702 dual V comparator with single fet. I use a 4-wire slot used that guarantees Vsense connection before PGND and +VBat.
Impedance measurement…
Part Number: TLV3701-Q1 Other Parts Discussed in Thread: TLV3701 , TLV3702 , TLV3704 Hi team
TI.com shows same FIT = 0.4 for TLV3701(1 Ch)/TLV3702(2 CH)/TLV3704(4 Ch) comparators.
I think the FIT calculated by TI.com is based on 1 Channel.
user…
Hello David,
Some suggestions:
LMC6772 (needs pull-up resistor on output)
TLV3702 (does not need pull-up)
I would also recommend placing a 10k resistor in series with the V+ input to limit the current into the pin should there be a fault.
…
