Part Number: TLV4062-Q1 Other Parts Discussed in Thread: TLV4062 The datasheet for TLV4062 states that in the case that INx comes up before V+ and slower than 200mv/ms then the output could be driven high in error. Does this caution also apply to the…
Part Number: TLV4062 Tool/software: Target device: TLV4062DRYR
In the component outline drawing, a conductor (tie bar cut) is visible on the side of the component, but is this at the same potential as the adjacent electrode?
Part Number: TLV4062
Tool/software:
Hi Support Team,
Could you help me verify whether the TLV4062 is suitable for use in this circuit application, or provide any other recommendations you may have?
Part Number: TLV4062 Other Parts Discussed in Thread: TLV9062 Tool/software: Hi team,
Is it possible to create a parallel TIA AC-coupled contract phase amplification circuit as shown in the attachment with a TLV9062 or 9064? As shown below, the frequency…
Part Number: TLV4062 Other Parts Discussed in Thread: TLV1922 Tool/software: Hello, I saw that TLV4062 has been applied in the OSFP module side, is there a corresponding solution for the host side?
Part Number: TLV4062 Other Parts Discussed in Thread: TLC271 , current on IN1 measured thru 1MΩ supply resistor is 1.12μA with VIN(x)+3.0V and 346nA with VIN(x)0V. Spec are mentioning 15nA
Have you got, sorry to ask, some products in the market off…
Part Number: TLV4062 Hi,
A question on the data sheet page 4, section 6.1 and not 3:
”For low-power devices, the junction temperature rise above the ambient temperature is negligible; therefore, the junction temperature is
considered equal to…
Part Number: TLV1922 Hello, I came across a post where someone asked about OSFP host-side applications, and there was a reply stating: 'the TLV1922 dual comparator with integrated 2.5V reference, but that device will most likely not work for the OSFP…
Hi,
No, there isn't any powergood from the TPS61094. I ended up using a TLV4062 (comparator with fixed reference) to pilot the EN pin of the later stage, as I couldn't find any schmitt trigger with a fixed voltage reference and ultra low power. Thank…
