Part Number: TLV7011 Other Parts Discussed in Thread: LMV7239 , TLV3601 , TLV3201 Dear Team,
I am using TLV7011 in my applications.
Now it is not available with vendors.
Could you please suggest an alternate P/N for the same
I need the same supply range…
Part Number: TLV7011
The datasheet says that IC has
internal hystersis .Then how to give Upper threshold and lower threshold voltages to it? or Do we have to connect the resistors R1 and R2 EXTERNALLY? or are they internal in the IC?
Part Number: TLV7011 Dear Team,
I need to design a comparator with Vih=1.3V and Vil=1.2V. Therefore hysteresis is 100mV. The circuit will be working on a 3.3V supply. During high state, the o/p of the comparator will be 3.3V and at the low state, it will…
Part Number: TLV7011 Hi,
I would like to know Power up time (tON). Datasheet value shows 20us as typ in 25 degree C. But could you please let me know MAX time in all temperature range?
As my customer evaluate the time, It takes 20us in 20 degree C and…
Part Number: TLV7011 Other Parts Discussed in Thread: TLV3201 Hello Team,
during a simulation of a 7Hz oscillator I need to change "TR maximum time step" from default 10G to 1u so see the correct result.
When changing this parameter my simulated…
Part Number: TLV7011 Hi,
TLV7011 datasheet shows Propagation Delay. It looks the delay increase in lower temp and lower input overdrive condition.
In this time, I would like to know below delay. Could you please support this?
- Delay (H->L) : ??? ns…
Part Number: TLV7011 Hello sir,
I come after so long time due to lock-down. I would like to ask you the best solution for Zero crossing detection of 230VAC. As you know I tried to achieve the ZCD using TLV7011 but you said isolation will come into picture…
Part Number: TLV7011 Hello TI team,
I am working with TLV7011 for ZCD application but not getting the results.
I tried it number of times, it is blasting at very first switching but one time I got the results. It was also blasted after some time.
Kindly…
Part Number: TLV7011 Hi Team,
I designed a comparator with Vil=910mV and Vih=918mV . When I measured the hysteresis after simulation I obtained a value of 28mV.
The internal Hysteresis of the IC is 14mV and external is 8mV. As per my understanding these…
Part Number: TLV7011 If I am using this part with a 1.8V supply and driving one input with a TTL signal, are there any adverse consequences I should be aware of? (like increased current draw when the TTL input is high, etc.)
