Part Number: TLV7031
Dear Team,
I am using TLV7031 in one of my designs. I can see that it has an internal Hysteresis of 7mV.
Please find my design calculation of feedback resistors. May I know where to accommodate this internal hysteresis in the equation…
Part Number: TLV7031 I use Tina for simulation experiment,and output is correct。
But the output in the actual circuit is wrong。Is the external resistance too high?
Part Number: TLV7031 Team-
The SPICE model for the TLV7031 contains various references to simulation ground ("0") within it.
This prevents the model from simulating properly when V- is biased elsewhere from "0" (see example below).…
Part Number: TLV7031 Hi there,
My customer is evaluating TLV7031, and he found that there were 2 input ranges in the datasheet.
Usually VCM defines the input range, what does the input voltage range mean here? Any difference?
Best,
Zeming
Part Number: TLV7031 Other Parts Discussed in Thread: TINA-TI , TLV3491 Hi there,
My customer is evaluating TLV7031 using below circuit, and he found 2 problems.
1. when output becomes L->H or H->L, there will be a undershoot / overshoot at the VIN…
Part Number: TLV7031 Other Parts Discussed in Thread: TINA-TI , TLV3491 Dear Team,
I am using TLV7031 for one of my applications.
TLV7031 is powered with 1.8V, but during the high state, it is only going to 1.6V. May I know why it is happening like this…
Part Number: TLV7031 Hey there,
I'm using TLV7031 as a low reference voltage comparator, as the reference voltage is just 31mV. I added some hysteresis for about 31mV/19mV thresholds. I think TLV7031 can support that, and the only interferer source is…
Part Number: TLV7031 Hi Team,
May I know the input impedance value of TLV7031? I cannot find the exact value in the datasheet.
Thanks.
Best Regards,
Livia Liu
There are current-sense amplifiers with a (latching) alert output like the INA381 or INA300. But you probably do not need their differential inputs, and their minimum amplification might be too high.
Alternatively, build a set/reset latch from two NAND…
Part Number: TLV7031 Hi Team,
Could you please tell me how I/P signal frequency and comparator delay is related.
When I used nanopower comparator my i/p and o/p are out of phase.
https://e2e.ti.com/support/amplifiers/f/14/t/833681
Regards
hari