Part Number: TLV7041 What is the plating layer and thickness of the solder pad of the TLV7041DPWR chip? The problem we are currently facing is that it is difficult to form an IMC layer when using three types of solder paste to verify the chip solder pad…
Part Number: TLV7041 Other Parts Discussed in Thread: TLV7081 Tool/software: Hi,
I would like to know please if TLV7041 has same parameter as in TLV7081 DS - Input Leakage Current?
Also, i would like to know please if TLV7081 can come in SOT-23 or…
Part Number: TLV7021 Other Parts Discussed in Thread: TLV7041 , TL331B , TLV1861 Tool/software: Hello,
I want to use this comparator (TLV7021/TLV7041) to monitor the input voltage of a device.
However, as the input voltage of the device can be as…
Part Number: TLV7041 The datasheet clearly states that TLV7041 has a POR circuit that will keep the output high impedance when the supply voltage is below the minimum supply voltage during ramp up or ramp down.
Does this hold true also for the case…
Part Number: TLV7041-Q1 Other Parts Discussed in Thread: TLV7041 Hi Experts,
A customer is currently performing an FMEA on a design which includes several TLV7041-Q1 devices, for automotive qualification. Below is there query:
From the SNOAA54 document…
Part Number: TLV7041 Could you please comment on what input pin current to expect? The way we read the datasheet the current should be really low, low pA range, yet in some test boards we see indications of higher values.
According to what we see, the…
Part Number: TLV7041-Q1 The TI Customer Support Center responded that even if it changes over time, it will still be within the specifications listed in the datasheet.
I have a question. Does this mean that there is no change over time? Or, do the electrical…
Part Number: TLV7041-Q1 Other Parts Discussed in Thread: TLV7041 Hi Team,
Could you kindly help for
The maximum voltage of the low level from customer's ultrasound (ULTRA_IO) is about 2.8V, and the high level is about 12V. The comparator is designed…
Part Number: TLV7041 Hi,
From the datasheet, Vin spec is VCC + 0.1V, and in my design there is possibility of Vin supply available first before VCC,.
1) Is disconnecting the ground before VCC available able to protect the op amp? Something like…
Part Number: TLV7041 Other Parts Discussed in Thread: TLV3201 , TLV3601 , LMV7219 , TLV3501 , TLV7031 Hi team,
one of my customer is using TLV7041 and their circuit is shown as attached. The input signal is a triangle wave and the output should be…
