Part Number: TLV9022-Q1 Hello team,
in the datasheet of the TLV902x-Q1 / TLV903x-Q1 components (SNOSDA9E – JUNE 2020 – REVISED MAY 2024) I cannot find the information regarding worst case (including maximum value at high temperature) leakage current…
Part Number: TLV9022 Other Parts Discussed in Thread: REF3425 Tool/software: Hello,
in the datasheet of the TLV9022 Rev. G is no value available for max. Input offset voltage drift in chapter 5.7 Electrical Characteristics on Page 9. Do you have further…
Part Number: TLV9022-Q1 Hi,
For TLV9022-Q1, i have two questions,
1. The TLV9022-Q1 has an internal Power-on-Reset (POR) circuit for known start-up or power-down conditions.
During the POR time ( 20us ), what is the state of the output （OC type…
Part Number: TLV9022 Other Parts Discussed in Thread: TLV7022 , TLV3603 , TLV4082 Hi experts,
My customer is using TP1946SR.(2ch, OD output) But they hope hysteresis is bigger than 20mV which TP1946SR couldn't do. So does TLV9022 work? Could you promote…
Part Number: TLV9022 Other Parts Discussed in Thread: TLV9032 , CD4044B , CD4043B , SN74LVC2G02 , SN74LVC2G00 I am struggling to create a latch out of this. As this one doesn't have inbuilt hysteresis, I have chosen the resistor values and when current…
Part Number: TLV9022-Q1 Other Parts Discussed in Thread: TLV9032-Q1 Dear TI team,
I using comparator TLV9022QPWRQ1 for comparing input sine wave (up to 200 kHz) with constant DC signal. I found that this comparator is working properly till 30 kHz input…
Part Number: TLV9022 I am struggling to create a latch out of this. As this one doesn't have inbuilt hysteresis, I have chosen the resistor values and when current is 5.5amps, i.e around 0.11 volts with my 200mOhm resistor, I want the output to go high…
Hi Art,
We have a workaround for the issue while we are in the process of fixing this model collision.
If the schematic does not call for TLV9022 and only the QbreakN model, a workaround is to remove nom_pspti.lib from the sim profile or change it…
Part Number: TLV9022 Other Parts Discussed in Thread: TL431
I would like to protect a 48V Lithium-Ion battery from undervoltage and overcurrent. These types of batteries cannot have a voltage value below their rated value and discharge current above…
