Part Number: TMP512 Hello team,
I have a question. If the shunt voltage exceeds the set voltage range (shaded area), what value will the data be?
For example, after 40.1mV in the highlighted area, does it become 2'b: 0000 1111 1010 0000 as well as…
Part Number: TMP512 Hello team,
At 9-11 bits, does table 9 change the full scale just by decreasing the resolution? For example, when PGA=1, does this mean that the full scale is 40mV and the resolution drops from 9 to 11 bits?
Regards,
Masa
Part Number: TMP512 Team,
I see the EVM setting is using the subregulator(3.3V) for some external load.
May I know how much current it can provide to external load?
Thank you.
Other Parts Discussed in Thread: TMP512 , LM95235 , DXP I would like to incorporate the TMP512 into my current design. I have two digital signals coming from an FPGA that I would like to use on these lines so that I can use this part's over temperature…
Hello David,
Thank you for the detailed explanation of your settings and configurations. I did go ahead and replicate your settings on my TMP512 EVM boad and your settings with respect to disabling shunt measurement ADC, continuous conversion, etc seem…
Other Parts Discussed in Thread: TMP512 , OMAP5910 Hello,
I want to use the TMP512 with an OMAP5910's I2C bus.
In the TI web's folder of the TMP512 appears to be compatible with the Standard I2C, but in the datasheet doesnt appear that funcionality…
Other Parts Discussed in Thread: TMP512 , TMP513 , TMP175 , DXP With the TMP512 you have Local, Remote1 and Remote 2 temperature registers.
When using the Remote1 & Remote2 you have the option for adjust the n-Factor to compensate for sensor differences…
Other Parts Discussed in Thread: TMP513 , TMP512 Datasheet for TMP513 shows register map that has MFG ID at register offset 0x1E or 0xFE and Device ID at 0x1F or 0xFF. However in the main_TMP513.vi Labview file that comes with the EVM, it looks like it…
Part Number: INA237 Other Parts Discussed in Thread: TMP512 , INA209 Hi Team,
I would like to INA237 to replace EMC1702 on the customer board. However, EMC1702 has the #THERM pin, looks like INA237 didn't support this feature.
May I know is there…
Part Number: TMP432 Other Parts Discussed in Thread: TMP431 , TMP442 , TMP512 , TMP464 Hi Team,
I'm looking for power-on reset value of the THERM limit registers up to 100°C in standard temperature mode.
For TMP431/432 A B version standard temperature…
