Rick,
My answers are below in a Q & A format.
Q1: At what level should TRSTn be held when the part is in operational mode and the JTAG is not being used?
A1: Holding TRSTn low during operational mode is the recommended approach. The DP83849 can…
Hi Thomas,
Thanks for your post.
As Randy suggested in the above thread,
If the TMS320C6745/7 are similar devices as TMS320DA804 in the same or similar packages , please refer pin no. 1 in Figure 2-4. Pin Map (PTP) which is in page no. 28 of TMS320C6747…
Other Parts Discussed in Thread: OMAP-L138 , TMS320C6745 Hi,
I can't find any timings related to Data Bus Parking feature of the EMIFA module in data sheets (e.g. for OMAP-L138, TMS320C6745 etc).
TRM (e.g. section 20.2.6 of SPRUH77A ) says that "After…
Other Parts Discussed in Thread: OMAP-L137 , OMAP-L138 , TMS320C6745 , OMAPL138 Hi, Is the "Digital I/O Buffers Age Prematurely" advisory introduced in the latest revision of Silicon Errata of the OMAP-L137 and TMS320C6745 applicable to the OMAP-L138…
Other Parts Discussed in Thread: TMS320C6745 Hi,
I am using TMS320C6745 DSP for developing a board. Using CC studio and selecting the simulator connection I am running the sample projects, but every time I run a program an error comes.
Invalid CIO…
Other Parts Discussed in Thread: TMS320C6745 , TMS320C6747 Hi,
I am using TMS320C6745 DSP for developing a board. Using CC studio and selecting the simulator connection I am running the sample projects, but every time I run a program an error comes…
Hello Shelly, TMS320C6745BPTP3 is Silicon Revision Version is 2.0. & TMS320C6745 C PTP3 is Silicon Revision Version 2.1. Details please go through the following link : http://www.ti.com/lit/er/sprz253d/sprz253d.pdf This pdf Documents describes the usage…
hi randy,
am using TMS320C6745 dsp processor and mcp3202 adc via spi protocol. in my board no dac ic is available. this is my own design board. hence am plan to revise my board with dac . so only asked to suggest best suit for TMS320C6745 and coding…
Other Parts Discussed in Thread: TMS320C6745 I am using the TMS320C6745 and setting up a DMA to a DDC 1553 device, the Total-ACE via EMIFA. I need to transfer 64 bytes so I set up an A-synchronized DMA. This device requires a delay after every other byte…
Other Parts Discussed in Thread: TMS320C6745 HI.
Am using tms320c6745 with xds100 usb emulator. i have connected the ADC(MCP3202 - 12 BIT ) via SPI pheriperal to the processor. i have gone through the register which is available for programming and…
