Part Number: TPA3113D2 Other Parts Discussed in Thread: TPA3138D2 Dear Team,
We are currently working on an access control system project and require suitable amplifire and speakers that meet the following specifications:
- Sound pressure levels…
Part Number: TPA3113D2
Tool/software:
Hi SIR:
Our device uses a TPA3113D2, with a 12V PVCC input, Audio Input Voltage 0.6 Vrms,a GAIN setting of 20dB, BTL setting , and a PLIMIT setting of 3.5V. using 1PCS 5W 8ohm when speaker.
After using it…
Part Number: TPA3113D2 Hi TI support teams,
TPA3113D2 output fully protected against short to VCC, According to the specification, the maximum value of VCC is 26V(Recommended)/30V(Absolute), , When the output is abnormally connected to 35V or more,…
Part Number: TPA3113D2 Hi,
We consider the TPA3113D2 support the 10W/8ohm, we don't need the THD<10%, and change the PLIMIT to 2.7V and the audio frequency is 1KHz,
Plesae provide your commend if this solution is available or it will damage the devide…
Part Number: TPA3113D2 Hi,
Our end customer feedback to use the TPA3113D2 has the EMI issue, the below is the description:
The e xcessive frequency points near 63KMz, there are waveform overshoot and waveform ringing when the SPK_OUT After LC filtering…
Part Number: TPA3113D2 Tool/software: Hi Team,
Customer would like to design class-D amp with TPA3113D2 but need to have short circuit protection(Both short to GND and VBUS)
Their idea now is add an ac coupling cap after output LC filter. Here are…
Part Number: TPA3113D2 Tool/software: Hi,
TPA3113D2 is being used in our device and we are seeing our device getting in to no audio situation in field.
Its not all the devices are behaving like this. We have around 20K units in field and around 100…
Part Number: TPA3113D2 Hello,
I've been working on a project which will be using the TPA3113D2 for two 3W, 4 Ohm speakers. As i don't have much experience with D-class amplifiers, could someone please comment on the schematics and whether it looks…
Part Number: TPA3113D2 Hi TI
1. The customer's amplifier output is connected to an 8 Ω 5W speaker. When setting the power consumption limit parameter, the reference is this figure. This figure does not indicate whether Pout refers to total power or…
