Part Number: TMS320F280049C Hi Team,
A customer created a custom board using TMS320F280049C control card as a reference, however, the end product is not recognized by the PC. They have installed CDM212364_Setup for FT2232HL but it doesn't work.
…
Hi,
I would recommend using the DP159 re-timer or TDP0604 re-driver for this design.
The Intel DDI interface has to be configured as DP++ source. Please see below for the DP159 and TDP0604 EVM design as reference.
5187.DP159RSBEVM REV B1.pdf
HSDC125_001_Schematic…
Also, i was looking at the ESD solutions on the TI website. Are there any suitable ESD solutions for the DS485? The breakdown voltage would need to satisfy the -7 to 12V common mode range (RS485). The only thing i could find was TPD2E007. Is there anything…
Marc
Please see attached DSI85-Q1 schematic.
int062A-001_SCH.pdf
Do you know if the GM8284DD has the internal 100ohm loading resistor or require external 100ohm loading resistor at its LVDS input? I can't find this information in its datasheet.…
Hi Danilo,
Sure, the rev B is just more complicated since it is common design that can be used for TMDS181 or DP159 so there are a lot more pop options.
tmds171_rgz_evm_revB.pdf
Dear SJ -
Thanks for the post and welcome to E2E!
Sorry for your issue - here is looks like the MOSFET Q2 (CSD18543) had an issue.
Since that it is after the reverse polarity protection (Q1 of same kind of device, see attached schematic), I would…
Hi Jonathan,
I'm trying to get these pushed to TI.com but I have attached them here for your use.
Regards, Bill
Daughtercard BOM
am335x_gpevm_gpdboard_3H0001_bom_rev1_2b.xlsx
LCD card BOM
am335x_gpevm_lcdaboard_3H0005_bom_rev1_3a.xlsx