Hi,
Thank you very much for your help. I understand what you've said, and here are my logs.
The current issue is that image capture either gets stuck in a permanent wait state or the captured frames are entirely green.
I can confirm that the deserializer…
Hi Jay,
I have also tried from imx219 driver, error is not coming but streaming is not happening.
static int ov2311_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { struct ov2311 *ov2311 = to_ov2311(sd…
I have this :
administrator@administrator-HP-EliteBook-840-G8-Notebook-PC:~/ti-processor-sdk-linux-am57xx-evm-06.03.00.106/board-support/linux-4.19.94+gitAUTOINC+be5389fd85-gbe5389fd85/arch/arm/boot/dts$ ls -l am57xx* -rw-r--r-- 1 administrator administrator…
Part Number: AM62A7 Tool/software: SDK ver: 10_00_00_08
During the SBL initialization process, we identified a new issue: the compiled vision_apps/out/AM62A/C7504/FREERTOS/release/vx_app_rtos_linux_c7x_1.out from the firmware builder is excessively…
Hi Adnan,
shaik adnan pasha said: After executing the provided steps, the system is now able to boot successfully from eMMC both with and without the SD card.
Glad to hear that.
shaik adnan pasha said: Is there a recommended way to persist these…
Part Number: TPLD1201 Other Parts Discussed in Thread: TPLD-ICS , TPLD801 , , TPLD1202 Tool/software: Hi team,
Here're a few questions from my customers about this part:
May I know whether the mark point of ICS only identifies the wave segment…
Part Number: TDA4AEN-Q1 Tool/software: Hi:
I work on TDA4AEN platform. I have get the J722S MCU+ SDK 10.01.00
In the mcu_plus_sdk_j722s_10_01_00_22 folder, I can build it and there have output image. The output file shown in below. Those output image…
Part Number: TDA4VM-Q1
Tool/software:
Dear Expert,
I am try to test MMCSD Linux boot w/ SBL only.
Ref as below.
https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/10_00_00_05/exports/docs/pdk_jacinto_10_00_00_27/docs/userguide…
3) Build DM R5F firmware in SDK 10.0 and make sure everything still boots PASS
Since the PLL updated firmware is using SDK 10.0, let's test with MCU+ SDK 10.0. That will allow us to verify if a) SDK 10.0 is actually affected, and b) if the patch actually…
