I also just noticed that when it boots within the first minute I'm getting these results:
root@am62axx-evm:/opt/edgeai-gst-apps# ls -al /var/lib/systemd/timesync/clock
-rw-r--r-- 1 systemd-timesync systemd-timesync 0 Oct 9 2024 /var/lib/systemd/timesync…
Part Number: AM625 Tool/software: Hi Team, We have a working ar1335 camera module integrated on TI-AM625 Starter Kit with processor SDK Version: 08.06.00.42. Now we have ported the camera driver to processor SDK Version: 09.02.01.10. In SDK_ 08.06.00…
Hi Tarun Mukesh:
My first question that the remoteproc list under /sys/class/remoteproc, I can't saw the MCU domain R5F sysfs.
I know the MCU domain R5F core 0 should be load in booting stage. But I can't find the remoteproc at /sys/class/remoteproc…
Hi Paul,
Can you set the alsa mixer controls and give it a try.
In our AM62x I usually set these controls for record and playback use-case to function properly.
root@am62xx-evm:~# amixer -c 0 cset numid=64 on
numid=64,iface=MIXER,name='Left PGA…
Hi Josue Zamitiz-Ayala , We haven't changed anything in the drm_drv.c file.
Since we were trying to port the SDK 9.03 for our custom board based on am5728 SOC, we have done certain changes in .config, .dts (mainly in arch/arm/boot/dts/am57xx-beagle…
Load kernel and NFS through DHCP/TFTP
1. Set up NFS Filesystem
To set up the NFS filesystem, the best way is to use the automated script given with the SDK. You can run sudo ./<SDK_INSTALL_DIR>/bin/setup-targetfs-nfs.sh to easily set up the NFS…
Hi Tarun Mukesh:
To enable the rpmsg_client_sample.ko, I add below config in kernel/configs/ti_arm64_prune.config. And clean build all image.
Below I check have been include kernel module at /lib/modules/6.6.44-ti-g4fcbbad8357c-dirty/kernel/samples…
Part Number: AM6421 Tool/software: HI,
we are trying to add icss1-eth in our Custom Board on LInux A53 domain.
we are using DP83822 PHY in RGMII mode
we are using ti-processor-sdk-linux-rt-am64xx-evm-09.02.01.10 SDK.
We are unable to integrate…
Part Number: PROCESSOR-SDK-AM64X Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi, I was trying to modify the hello world application on R5F core to be loaded by Linux on AM64x EVM without success. These are the error messages found after…
Part Number: AM6422 Tool/software: Hi TI Support Team,
I am trying to flash u-boot images and Linux OS images on eMMC from an SD card. But the U-boot loader itself is not loading. Could you please let me know if I have missed any steps or configurations…
