For TUSB4020BI, when PWRPOL is low, it's active high .but TPS2062 is active low to enable the vbus switch.
Also MCP2021 VDD need 5v supply?
Regards
Brian
Part Number: TPS2066 Hi
Could you tell us the difference between TPS2066DGNR-1 and TPS2066DR?
I think TPS2066-1 has discharge control, but TPS2066 is not..
Could you please point out the difference between TPS2066-1 and TPS2066?
BestRegards
Part Number: TPS2062C Other Parts Discussed in Thread: TPS2062
Hi
Customer want check TPS2062 Max T j / Max_P C / Max T C , Could you check this ? Thanks.
Part Description
Θja (C/W)
Θjc (C/W)
Max Tj
Max_Pc
(W)
Max Tc
Supplier …
Part Number: TPS2062 Hi team,
In use of TPS2062, VIN is connected to 5V (USB power) that is always turned on. And EN1,2 pin are connected to Vcc=3.3V(system power) with pull-up and are controlled through single inverter gate which is connected to the…
Part Number: TPS2062 Other Parts Discussed in Thread: TPS2061 Hi,
PLease support to provide your comments for questions as below.
1. What is the Vih and Vil for EN1 and EN2 pins? Considering to disable the switch by connecting ENx pins to 3.3V, is it…
Other Parts Discussed in Thread: DM3730 , TPS2062 Hi every one,
I'm working actually on the board support package for a DM3730 custom board,
We have integrated a TI TPS2062 , and we wonder if any driver is available ?
Thanks in advance.
Part Number: TPS2066C Other Parts Discussed in Thread: TPS2062
In TPS2066c Fig 9 Rload is 2ohms and Vin is 5V, Vout is not following input voltage and Iout should have been 2.5A for 2 ohms load.
If my voltage source is 5V,5A then during short circuit…
Part Number: TPS2052 Other Parts Discussed in Thread: , TPS2066 , TPS2062 Hi
We are using TPS2052 in one of our design. The continuous load current in datasheet is given as 500mA, can we load this device continuous to 1A.
Part Number: TUSB2077A Other Parts Discussed in Thread: TPS2062 Hi, I have a prototype design with the USB hub mentioned in the title, configured as self-powered, non-ganged.
My issue is that I can't get the downstream ports to work since the !PWRON-signals…