Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TPS2062 Hi,
This is David from Bureau Veritas Taiwan, the third-party testing laboratory in Taiwan. We're dealing with a multimedia product to get it tested in terms of Taiwan regulations. TPS2062DGN is used in the device and we need IEC…
Part Number: TPS2062 we need for the certification of our devices that the IC "TPS2062" complies with the test specified in the standard according to IEC 60950-1, Appendix CC (or UL 60950-1, Appendix CC) for USB interfaces. Is the module certified…
Part Number: TPS2066 Hi
Could you tell us the difference between TPS2066DGNR-1 and TPS2066DR?
I think TPS2066-1 has discharge control, but TPS2066 is not..
Could you please point out the difference between TPS2066-1 and TPS2066?
BestRegards
Part Number: TUSB4020BI Other Parts Discussed in Thread: TPS2062 Hello everyone.
I am using a USB hub for the first time and am fairly new to this topic. My goal is to connect 2 USB devices to the computer via a USB cable and I thought I would need a…
Hi, Ray,
Below are my comments for your questions:
1) TPS2062 is not noise sensitive, so I think the long Vin trace is okay as long as the 10uf and 0.1uf is put close to part.
2)You can take it as a power FET from IN to OUT. The only voltage drop is…
Hi ,
1)Sorry for response late. Yes, you need to add the PU or PD resistor for EN since this is good for noise immune.
TPS2062 is EN-pin active low device , so En-pin low than 0.8 V the divce will be actived.
2) There are no output voltage when device…
Other Parts Discussed in Thread: TPS2062 Dear E2E,
Our customer, Hirachi, asked if TI got CB certification for TPS2062.
Based on our search, TI has not got it. Why don't you get it?
We replied to Hitachi that TI has no CB for TPS2062, but TI got …
Other Parts Discussed in Thread: TPS2062 , DM3730 Hi friends,
We're using a board based on the beagle-xm reference design. It exposes 3 USB ports from the LAN9514 via the USB3320 and upstream the DM3730. So DM3730's HSUSB2_* connected to USB2HS_DAT0..7…
