Part Number: TPS22904 Hello, guys.
It is about the TPS22904 load switch. I downloaded CAD/CAE symbol from your site and there is a mismatch between schematic CAD symbol and datasheet info.
Datasheet says that pin A1 is Vin and pin A2 is Vout. On the…
Part Number: TPS22904 Other Parts Discussed in Thread: TPS22901 , TPS22902 Is the pinout indicated in the datasheets for the two subject parts (TPS22904 and TPS22902B) correct (i.e. mirrored)? If so, I am looking for a 22904 pin-compatible part with a…
Part Number: TPS22904 Other Parts Discussed in Thread: TPS22915 , TPS22916 Hi,
i have a dual supply voltage system with VDD/VSS= +2.5V/-1.0V, and the supply current is 150mA.
LDO is the power source of VDD(+2.5V); DC/DC convertor is the power source…
Hello Victor,
Please take a look at the following devices:
TPS27081A
TPS22904
TPS22921
They're in order starting from lowest Iq downt to highest Iq (of these specific options). I excluded choices with inventory < 10000. They all support 1.8V…
Other Parts Discussed in Thread: TPS22904 , DLPC150 , SN74ALVC08 , CC2564 , ADS1255 , TMP006 , HDC1000 Hi,
I have a Tiva C project working on 2.10.1.38 TI RTOS version. I just migrated it to TI RTOS 2.16.1.14; following the migration guides. Pasted…
Hi Guy Yater,
Thanks for the response.
When I was going through http://www.ti.com/lit/sg/sszb130b/sszb130b.pdf this document & I found recommended part as TPD8E003.
So now I'm in confusion to use any one of them, Can you please suggest me , which…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
