Hi Apurva,
I would recommend using our TPS3435 instead, since the TPS3435 has a VDDmin of .9V.
The main difference between SET1 and EN is ENOUT. Both inputs will disable the watchdog, but EN will also pull the ENOUT low. Both inputs are connect to a logic…
Hi Grady,
For monitoring device operation we have two options. Timeout Watchdog or Window Watchdog.
A watchdog device, in general, requires a pulse from a controller (i.e CPU, MCU, SoC, etc) within a specific time, if a pulse is not received by the watchdog…
Hello Connor,
Please have a look at TPS3435 family of watchdog devices.
I think, you want the output to stay low indefinitely (latched state) in case of watchdog error.
The pinout C of TPS3435 supports this feature.
Please have a look and let me know…
Hello Jimmy,
I would recommend the TPS37A010122DSKR has an adjustable threshold undervoltage and overvoltage sense and can handle input voltages up to 65V. We do not have a watchdog device that can handle 12V input but I would recommend our new TPS3435 …
Part Number: TPS3431-Q1 Other Parts Discussed in Thread: TPS3436-Q1 , TPS3435-Q1 , , TPS3431 TPS3431SDRBR We would like to know if there are any Watchdog timers/ any other device available, which will not be reset(as attached below from the datasheet), when…
Part Number: TPS3431 Other Parts Discussed in Thread: TPS35-Q1 , TPS3435 , TPS3851 , Hi team,
Could you confirm whether the WDI pin can support 16MHz?
Are there any devices whose WDI pin can support 16MHz? Do you think devices below can support it?
TPS35…
Part Number: TPS3808 Other Parts Discussed in Thread: TLV840 , TPS3435 , TPS3840 , TPS3890
Hi support team,
I have a question about reset width of MR pin of TPS3808.
According to the SBVS050M, it is 0.001μs (typ), which is considerably shorter than SENSE…
